Home > PGS Grill Models > PGS A40
Dual burner gas grill from Pacific Gas Specialties (PGS)
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your PGS grill.
Part diagrams and owners manuals for PGS model: A40
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
|
Replacement gas grill parts for PGS model: A40
A40 Burners
Stainless steel twin H burner and venturi assembly. Includes:
- One (1) twin SS H burner.
- Two (2) SS twist lock venturi.
- Built-in spider guards.
- Sold as assembly only, burner and venturi not available seperately.
Part Number: GG-DLB13TL
Weight: 3.0
Dimensions: 19 1/2” x 8”
Stainless steel twin H burner and venturi assembly.Fits WNK and TJK grills. Includes:
- One (1) GG-DLB SS twin H burner.
- One (1) GG-DV-13 bolt-on twin venturi.
- All necessary gaskets and hardware.
Part Number: GG-DLB13
Material: stainless steel
Weight: 3.0
Dimensions: 8 1/4” x 20”
Large stainless steel twin H burner.
NOTE: This burner uses bolt-in venturis, such as part
GG-DV13. It does not accept twist-in type venturis.
See part
GG-DLB13 for both the burner and venturi in a kit.
Part Number: GG-DLB
Weight: 3.0
Dimensions: 19 1/2” x 8”
A40 Venturis
SS twin venturi. For use with GG-DLB and HH-DSB H burners. Includes gaskets and hardware, and spider guards. Fits JNR, WNK, and TJK grills.
Part Number: GG-DV13
Material: stainless steel
Weight: 1.0
A40 Igniter Components
Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces PGS factory part# A100140
Part Number: GG-EIB
Weight: 0.2
12” igniter connecting wire for battery-operated electronic igniters. Black end female spade connects to the igniter, other red female spade end connects to the electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces PGS factory part# A100145
Part Number: GG-ERIW
Weight: 0.3
Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces PGS factory part# A100301
Part Number: GG-IB
Weight: 0.2
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
A40 Grease Trays
Stainless steel grease cup for JNR, WNK, and TJK for PGS model A40.
Replaces PGS factory part# 100837
Part Number: GG-GC
Weight: 0.3
A40 Regulators and Hoses
Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.
FITS: Up to 60,000 BTUs
Replaces PGS factory part# A100510
Part Number: HR-4B
Weight: 0.8
A40 Warming Racks
Stainless Steel swing away warming rack for PGS model A40.
Replaces PGS factory part# A140071
Part Number: GG-TS
Weight: 1.95
Dimensions:
- Front-To-Back: 24 3/4″
- Side-To_Side: 8 1/2″
A40 Accessories
Apple wood chips.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with portk, lamb, poultry, and fish.
Part Number: 00230
Weight: 2.0
Polished stainless steel turner with an ergonomic soft grip grey handle and red accents. Great for flipping burgers or turning delicate fish fillets.
Part Number: 43108
Material: stainless steel
Weight: 0.10
Dimensions: 16
Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.
Part Number: 98130
Material: porcelain steel
Weight: 1.0
Dimensions: 11
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
PGS model A40. If the BBQ grill part you are looking for is not listed above, make a note of the dimensions of your original part and try searching by part category. 02-Nov-26
|
We ship PGS BBQ parts worldwide
Back to PGS grill parts