Home > Sterling Grill Models > Sterling 2200
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts to fit Sterling model: 2200
2200 Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 11002-77902
Material: stainless steel
Weight: 4.5
Dimensions: 19 1/2” x 8”
Stainless steel burner. Includes mounting brackets.
Part Number: 11002
Material: stainless steel
Weight: 2.8
Dimensions: 19 1/2” x 8”
2200 Venturis
special venturi pair. Includes all necessary gaskets and screws/nuts.
Part Number: 77902
Material: zinc plated steel
Weight: 0.7
Dimensions: 7 1/2” x 3 1/4”
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
2200 Cooking Grids
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids. Fits some Arkla, Arklamatic, Charmglow, Embermatic, Kenmore, and Sterling grills. Check your model to be sure. May fit others.
- Made in USA

- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2) panels
Each panel measures:- Front-to-Back: 14 3/8”
- Side-to-Side:11 3/4”
Total Side-to-Side: 23 1/2”
Part Number: 51302-SS-X2
Material: Stainless steel
Weight: 3.7
Dimensions:
- Front-To-Back: 14 3/8″
- Side-To_Side: 11 3/4″
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Fits Arkla, Arklamatic, Charmglow, Embermatic, Kenmore, Sterling and more.
Part Number: 51302-SS
Material: Stainless steel
Weight: 3.7
Dimensions:
- Front-To-Back: 14 3/8″
- Side-To_Side: 11 3/4″
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.
- Made in USA

- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2).
Each panel measures:- Front-to-Back: 15”
- Side-to-Side: 11 3/8”
Total Side-to-Side: 22 3/4”
Part Number: 54632-SS-X2
Material: stainless steel
Weight: 6.8
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 22 3/4″
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Fits grills by Arkla, Falcon, Charbroil, Kenmore and Thermos. May fit others.
Part Number: 54632-SS
Material: stainless steel
Weight: 3.40
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 11 3/8″
Premium universal cooking grids. Set of two (2). Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 15”
- Side-to-Side: 12”
Total Side-to-Side: 24”
Part Number: 61702-UNI-X2
Material: cast iron
Weight: 12.9
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 24″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 61702-UNI-X2 for a set of two (2).
Part Number: 61702-UNI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 12″
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model
Part Number: CG-61P-CI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 12″
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- 304 commercial grade stainless steel
- .225 diameter stainless rods
- Made in USA

- Sold individually; grill may require more than one grid
Part Number: CG-9SS
Material: Stainless steel
Weight: 3.7
Dimensions:
- Front-To-Back: 14 3/8″
- Side-To_Side: 11 3/4″
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 51302
Material: porcelain steel wire
Weight: 4.5
Dimensions:
- Front-To-Back: 14 5/16″
- Side-To_Side: 24″
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 54632
Material: porcelain steel wire
Weight: 6.13
Dimensions:
- Front-To-Back: 14 15/16″
- Side-To_Side: 23 7/8″
Cast iron
cooking grids (set of 2).
Porcelain enameled, glossy finish. These grids have a slight bow in the middle and were designed to replace some original factory grids with this bow.
Part Number: 61702
Material: gloss cast iron
Weight: 11.0
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 24″
Chrome/nickel plated
cooking grid. Sold individually, two (2) required. Made in USA

.
Part Number: CG-13
Material: Chrome steel
Weight: 2.4
Dimensions:
- Front-To-Back: 14 1/4″
- Side-To_Side: 11 7/8″
2200 Igniter Components
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
2200 Accessories
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA
.
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
Apple wood chips.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with portk, lamb, poultry, and fish.
Part Number: 00230
Weight: 2.0
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4
Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.
Part Number: 98130
Material: porcelain steel
Weight: 1.0
Dimensions: 11
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Sterling 2200 - 02-Nov-26
|
We ship Sterling BBQ parts worldwide
Back to Sterling grill parts