Model: 2220

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Sterling Grill Models > Sterling 2220



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.

Replacement gas grill parts for Sterling model: 2220


 

2220 Burners

Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.

Part Number: 11002-77902
Material: stainless steel
Weight: 4.5
Dimensions: 19 1/2” x 8”
stainless steel burner for Sterling model 2220 

$68.44






Stainless steel burner. Includes mounting brackets.

Part Number: 11002
Material: stainless steel
Weight: 2.8
Dimensions: 19 1/2” x 8”

$56.54








 

2220 Venturis

special venturi pair. Includes all necessary gaskets and screws/nuts.

Part Number: 77902
Material: zinc plated steel
Weight: 0.7
Dimensions: 7 1/2” x 3 1/4”
 

$14.71






Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

$7.65








 

2220 Cooking Grids

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids. Fits some Arkla, Arklamatic, Charmglow, Embermatic, Kenmore, and Sterling grills. Check your model to be sure. May fit others.

  • Made in USA
  • Commercial grade 304 stainless steel
  • .225” solid stainless rods
  • Sold as a set of two (2) panels

Each panel measures:
  • Front-to-Back: 14 3/8”
  • Side-to-Side:11 3/4”
Total Side-to-Side: 23 1/2”


Part Number: 51302-SS-X2
Material: Stainless steel
Weight: 3.7
Dimensions:
  • Front-To-Back: 14 3/8″
  • Side-To_Side: 11 3/4″

$95.26






Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.
  • Made in USA
  • 304 commercial grade stainless steel
  • Solid .225 diameter stainless rods
  • Sold individually
Fits Arkla, Arklamatic, Charmglow, Embermatic, Kenmore, Sterling and more.

Part Number: 51302-SS
Material: Stainless steel
Weight: 3.7
Dimensions:
  • Front-To-Back: 14 3/8″
  • Side-To_Side: 11 3/4″

$53.92






Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.

  • Made in USA
  • Commercial grade 304 stainless steel
  • .225” solid stainless rods
  • Sold as a set of two (2).

Each panel measures:
  • Front-to-Back: 15”
  • Side-to-Side: 11 3/8”
Total Side-to-Side: 22 3/4”


Part Number: 54632-SS-X2
Material: stainless steel
Weight: 6.8
Dimensions:
  • Front-To-Back: 15″
  • Side-To_Side: 22 3/4″

$91.80






Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.
  • Made in USA
  • 304 commercial grade stainless steel
  • Solid .225 diameter stainless rods
  • Sold individually
Fits grills by Arkla, Falcon, Charbroil, Kenmore and Thermos. May fit others.

Part Number: 54632-SS
Material: stainless steel
Weight: 3.40
Dimensions:
  • Front-To-Back: 15″
  • Side-To_Side: 11 3/8″

$49.81






Premium universal cooking grids. Set of two (2). Porcelain treated cast iron. Matte finish.

Each panel measures:
  • Front-to-Back: 15”
  • Side-to-Side: 12”
Total Side-to-Side: 24”


Part Number: 61702-UNI-X2
Material: cast iron
Weight: 12.9
Dimensions:
  • Front-To-Back: 15″
  • Side-To_Side: 24″

$118.98






Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 61702-UNI-X2 for a set of two (2).



Part Number: 61702-UNI
Material: cast iron
Weight: 6.45
Dimensions:
  • Front-To-Back: 15″
  • Side-To_Side: 12″

$67.49






Cast iron cooking grid. Porcelain treated, matte finish. Sold individually, number required varies by grill model

Part Number: CG-61P-CI
Material: cast iron
Weight: 6.45
Dimensions:
  • Front-To-Back: 15″
  • Side-To_Side: 12″

$67.49






Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.
  • 304 commercial grade stainless steel
  • .225 diameter stainless rods
  • Made in USA
  • Sold individually; grill may require more than one grid


Part Number: CG-9SS
Material: Stainless steel
Weight: 3.7
Dimensions:
  • Front-To-Back: 14 3/8″
  • Side-To_Side: 11 3/4″

$53.92






Porcelain steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 51302
Material: porcelain steel wire
Weight: 4.5
Dimensions:
  • Front-To-Back: 14 5/16″
  • Side-To_Side: 24″

$88.71






Porcelain steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 54632
Material: porcelain steel wire
Weight: 6.13
Dimensions:
  • Front-To-Back: 14 15/16″
  • Side-To_Side: 23 7/8″

$80.44






Cast iron cooking grids (set of 2). Porcelain enameled, glossy finish. These grids have a slight bow in the middle and were designed to replace some original factory grids with this bow.

Part Number: 61702
Material: gloss cast iron
Weight: 11.0
Dimensions:
  • Front-To-Back: 15″
  • Side-To_Side: 24″

$95.62






Chrome/nickel plated cooking grid. Sold individually, two (2) required. Made in USA .

Part Number: CG-13
Material: Chrome steel
Weight: 2.4
Dimensions:
  • Front-To-Back: 14 1/4″
  • Side-To_Side: 11 7/8″

$31.14








 

2220 Igniter Components

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03750
Weight: 0.05
Dimensions: 1/16

$6.01






Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03751
Weight: 0.05

$3.98






Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only. Will NOT fit on cast iron burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03900
Material: ceramic
Weight: 0.2

$10.90






Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-15B
Weight: 0.3

$15.59








 

2220 Accessories

BBQ'er choice porcelain grill briquets. The finest available.
  • Self-Cleaning Porcelain Briquettes.
  • Made of fired porcelain for even heat transfer.
  • Virtually indestructible.
  • About 56 pieces covers approximately 310 square inches.
  • Made in USA .
NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

$50.28






Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.95






Maple wood chips.
  • All natural wood smoke flavor
  • Great for use in BBQ's or smokers.
  • 170 cubic inches (2 lbs. approx) in resealable bag


Try with portk, lamb, poultry, and fish.

Part Number: 00270
Weight: 1.3

$9.05






16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9
Dimensions: 16” x 4”

$16.59






Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.



Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41






Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Weight: 1.5
Dimensions: 7 1/2” x 16”

$22.60






Stuffed Burger Press

The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.



Part Number: 24795
Weight: .3

$13.25







Sterling model 2220. If the BBQ grill part you are looking for is not listed above, make a note
of the dimensions of your original part and try searching by part category. 02-Nov-26



We ship Sterling BBQ parts worldwide

Back to Sterling grill parts


GRILLING  ACCESSORIES

Replacement parts orders for Sterling grills $79 and more shipped to the USA (contiguous 48 states only) Free of charge.

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy