Home > Sterling Grill Models > Sterling 5122-64
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts for the Sterling 5122-64
5122-64 Burners
Genuine OEM Sterling stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Genuine OEM Sterling Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
5122-64 Cooking Grids
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 12 3/4”
Material: cast iron
Weight: 6.75
Image not available
$43.13
5122-64 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave for Sterling model 5122-64.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
5122-64 Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Sterling electronic push-button 3-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-246
Weight: 0.6
$18.48
Genuine OEM Sterling electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
5122-64 Grease Trays
Grease tray 440; porcelain flatte matte finish for Sterling model 5122-64.
Part Number: 57055-901
Dimensions: 6 3/4” x 25 7/16”
Material: porcelain steel
Weight: 1.25
$27.24
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 5122-64.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
5122-64 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 5122-64.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
$5.15
5122-64 Wheels and Castors
Wheel 6” plastic with 3/8” axle hole for Sterling model 5122-64.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Sterling model 5122-64.
Part Number: 10240-13
Weight: .10
$2.23
5122-64 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 1 7/8” wide and 1 7/16” high. The threaded stem is about 5/16” diameter and 1 1/8” long.
Part Number: 10571-5
Dimensions: 1 7/8” x 1 7/16”
Weight: 0.1
$15.11
5122-64 Miscellaneous Repair Parts
Hinge pin clip for Sterling model 5122-64.
Part Number: S21233
Weight: 0.01
$1.08
5122-64 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Sterling model 5122-64.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Sterling model 5122-64.
Part Number: Y-11231
Weight: 0.01
$1.08
5122-64 Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96