Home > Sterling Grill Models > Sterling 538284
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts for Sterling model: 538284
538284 Burners
Genuine OEM Sterling Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
538284 Cooking Grids
Cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled, glossy finish
Part Number: 22005-181-R
Dimension Front-to-Back: 19 1/16
Dimension Side-to-Side: 12 1/2
Material: Cast iron
Weight: 7.5
$59.36
538284 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave
heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.
Part Number: 22209-904
Dimension Front-to-Back: 17 1/2
Dimension Side-to-Side: 5 7/8
Material: Stainless steel
Weight: 1.15
$21.48
538284 Igniter Components
Genuine OEM Sterling electronic push-button 4-spade igniter.
- Uses AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-247
Weight: 0.5
$18.48
Genuine OEM Sterling electrode and wire - rear burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 342-C539
Weight: 0.1
$7.75
538284 Grease Trays
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 538284.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
538284 Knobs and Handles
Genuine OEM Sterling silver control knob.
There has been some confusion regarding the knob part numbers caused by revisions by the manufacturer. Basically, for the models whose owners manual shows part# 22002-966 or 22002-968, pick 22002-96 if you need a silver knob; pick 22002-966 if you need a black knob.
- Off position D-Value: 6 o'clock or 12 o'clock (no on/off mark)
- Knob diameter: 2 1/4
- Socket diameter: 8mm
- Knob shaft: 1/2 inch
Part Number: 22002-96
Weight: 0.1
$8.78
CONTROL KNOB CHROME - SMALL for Sterling model 538284.
Part Number: 22004-96
Weight: 0.1
Image not available
$5.15
538284 Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
538284 Wheels and Castors
Rubber castor, 3 w/plate, locking for Sterling model 538284.
Part Number: 10892-23
Weight: 0.66
$6.87
538284 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 1 7/8 wide and 1 7/16 high. The threaded stem is about 5/16 diameter and 1 1/8 long.
Part Number: 10571-5
Dimensions: 1 7/8 x 1 7/16
Weight: 0.1
$15.11
538284 Miscellaneous Repair Parts
Hinge pin clip for Sterling model 538284.
Part Number: S21233
Weight: 0.01
$1.08
Cotter pin for Sterling model 538284.
Part Number: Y-11230
Weight: 0.01
$1.08
Washer for Sterling model 538284.
Part Number: S21255
Weight: 0.01
$1.08
538284 Side Burners
SIDE BURNER GRID BLK 330/440/550. Grid for side burner. 9 diameter round and has two support prongs. Porcelain coated, glossy finish.
Note: Some owners manuals incorrectly list this part as 53139-98.
Part Number: 53140-981
Weight: .8
Image not available
$18.38
538284 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18 x 0 5/8
Material: stainless steel
Weight: 0.4
$6.64
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9 x 13
Weight: 0.4
$8.64
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73