Home > Sterling Grill Models > Sterling 565347
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts for Sterling model: 565347
565347 Burners
Genuine OEM Sterling stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Genuine OEM Sterling Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
565347 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave for Sterling model 565347.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
565347 Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Sterling electronic push-button 4-spade igniter.
- Uses AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-247
Weight: 0.5
$18.48
565347 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
GREASE PAN - 330/440/550 for Sterling model 565347.
Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40
$15.11
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 565347.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
565347 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 565347.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
$5.15
565347 Regulators and Hoses
Genuine OEM Sterling NG gas hose for Sterling model 565347.
Part Number: 10111-K45
Weight: 2.1
$88.64
565347 Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”) for Sterling model 565347.
Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3
$35.16
565347 Valves, Orifices, and Manifolds
VALVE ASSY 440 S/B R/B NG for Sterling model 565347.
Part Number: 59005-077
Weight: 1.0
Image not available
$98.25
565347 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
565347 Miscellaneous Repair Parts
REAR BURNER SPRING for Sterling model 565347.
Part Number: S21362
Weight: 1.0
$1.08
Cotter pin for Sterling model 565347.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for Sterling model 565347.
Part Number: S21233
Weight: 0.01
$1.08
565347 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Sterling model 565347.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Sterling model 565347.
Part Number: Y-11231
Weight: 0.01
$1.08
565347 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73