Sunbeam 423HC-1

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 
   Home > Sunbeam Grill Models > Sunbeam 423HC-1



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sunbeam grill.

Replacement grill parts for the Sunbeam 423HC-1


 

423HC-1 Burners

Standard stainless steel burner and venturi assembly. Includes OBS-N1 oval SS burner and two V-12 venturis. Uses burner-mounted IG-5 snap-in collector box and ignitor electrode assembly (sold separately).

Part Number: OBS-N1+V-12
Dimensions: 4” x 14”
Material: stainless steel
Weight: 3.0

$55.40

Qty
 






 

423HC-1 Venturis

Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

$12.82

Qty
 




Single Gasket Kit Economy Burners for Sunbeam model 423HC-1.

Part Number: SHK4
Weight: 0.01

$4.02

Qty
 






 

423HC-1 Cooking Grids

Stainless steel cooking grid. Sold individually.

Part Number: CG-29
Dimension Front-to-Back: 12 3/4”
Dimension Side-to-Side: 19 13/16”
Material: chrome steel
Weight: 2.2

$25.82

Qty
 






 

423HC-1 Rock Grates

Rock grate for holding lava rock or ceramic briquettes for Sunbeam model 423HC-1.

Part Number: BG-25
Dimensions: 10” x 18 1/2”
Material: carbon steel
Weight: 3.3

$29.73

Qty
 






 

423HC-1 Igniter Components

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03400
Weight: 0.1

$5.35

Qty
 




Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
    Includes:
  • Gas collector box
  • Ceramic electrode and wire
  • Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-11B
Weight: 0.3

$9.34

Qty
 




OEM style collector box.
  • Bolts onto burner with venturi
  • Used with burners 11502, 15102, 15202, and 15402
  • Use original electrode; replacement electrode # 04510 has been discontinued

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 05152
Material: stainless steel
Weight: 0.1

$6.20

Qty
 






 

423HC-1 Valves, Orifices, and Manifolds

Right valve of assembly 37000. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models. D-Value is 6 o'clock

Part Number: 37400
Material: brass
Weight: 0.3
 

$26.66

Qty
 






 

423HC-1 Accessories

Durable 2 5/16” round briquettes
  • Self-cleaning
  • Control flare-ups while holding an even heat pattern.
  • About 53 pieces, covers approximately 275 sq. inches.
  • Fits all gas grills


Part Number: BQ-5
Weight: 7.2

$31.19

Qty
 




Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.48

Qty
 




Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

$25.40

Qty
 




BBQ'er choice porcelain grill briquets. The finest available.
  • Self-Cleaning Porcelain Briquettes.
  • Made of fired porcelain for even heat transfer.
  • Virtually indestructible.
  • About 56 pieces covers approximately 310 square inches.
  • Made in USA .
NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

$42.81

Qty
 




Deluxe 17” stainless steel turner.
  • Soft comfort rubber grip
  • Stainless steel blade


Part Number: 43108
Material: stainless steel
Weight: 0.10

$9.48

Qty
 




Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Qty
 




Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

 $31.80

 $21.99

Qty
 




deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7

$25.57

Qty
 





Sunbeam grill model 423HC-1. Some parts not specific to a grill brand or model like regulators, posts,
and heat indicators, which are listed in our repair parts section. 05-May-24



We ship Sunbeam BBQ parts worldwide

Back to Sunbeam grill parts



GRILLING  ACCESSORIES
Briquettes & Lava Rock
Grill Covers
Grilling Tools
Basting and Cleaning brushes
Wood Chips and Smoker Trays
Grid Toppers, Griddles & Racks
Fish and burger baskets
Grill and Tank Accessories
Shish-kebab Sets & Skewers
Grilling & outdoor cooking books

USA shipping (contiguous 48 states only) on all Sunbeam part orders $49 and more

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Sunday, May 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy