Home > Sunbeam Grill Models > Sunbeam E353E
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sunbeam grill.
Replacement grill parts to fit Sunbeam model: E353E
E353E Burners
Standard stainless steel burner and venturi assembly. Includes OBS-N1 oval SS burner and two V-12 venturis. Uses burner-mounted IG-5 snap-in collector box and ignitor electrode assembly (sold separately).
Part Number: OBS-N1+V-12
Dimensions: 4” x 14”
Material: stainless steel
Weight: 3.0
$55.40
E353E Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
two venturi gaskets with screws for Sunbeam model E353E.
Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05
$4.65
Single Gasket Kit Economy Burners for Sunbeam model E353E.
Part Number: SHK4
Weight: 0.01
$4.02
E353E Cooking Grids
Chrome steel
cooking grid. Sold individually.
Part Number: 41301
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 22”
Material: chrome steel wire
Weight: 3.7
$40.67
Premium quality stainless steel
cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- .225 diameter solid stainless rods
- Each panel measures 14 1/2” x 10 1/2”
- Overall dimensions: 14 1/2” x 21”
.
Part Number: CG-50SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6
$85.75
Commercial 304 grade stainless steel
cooking grid with 1/4” diameter rods. Sold individually. Made in USA
.
Part Number: CG-53SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5
$68.90
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
NOTE:This single-piece part also replaces some two-piece grid sets.
Part Number: 51402-SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5
$68.90
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2) panels
Each panel measures:- Front-to-Back: 14 1/2”
- Side-to-Side: 10 1/2”
Total Side-to-Side: 21”Part Number: 51702-SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6
$85.75
Premium stainless steel cooking grid. Far superior to porcelain coated steel grids. SOLD INDIVIDUALLY.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold individually
Part Number: 51702-SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.8
$46.47
E353E Rock Grates
carbon steel
rock grate for Sunbeam model E353E.
Part Number: 92801
Dimensions: 12 1/2” x 20 1/8”
Material: steel wire
Weight: 4.0
$30.13
E353E Igniter Components
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-11B
Weight: 0.3
$9.34
OEM style collector box.
- Bolts onto burner with venturi
- Used with burners 11502, 15102, 15202, and 15402
- Use original electrode; replacement electrode # 04510 has been discontinued
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 05152
Material: stainless steel
Weight: 0.1
$6.20
E353E Valves, Orifices, and Manifolds
Right valve of assembly 37000. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models.
D-Value is 6 o'clock
Part Number: 37400
Material: brass
Weight: 0.3
$26.66
E353E Accessories
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts
94751,
92571 and other simular trays.
Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2
$47.58
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73