Thermos 461833803 (Quickset Traditional) | Parts

Home > Thermos Grill Models > Thermos 461833803

Thermos Quickset Traditional charcoal/gas dual-burner LP gas grill

We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Thermos grill. This is best done with the old parts out of the grill. Verify your Thermos grill model number.

Replacement gas grill parts for Thermos model: 461833803 (Quickset Traditional)

461833803 (Quickset Traditional) Cooking Grids

Porcelain steel cooking grid. Porcelain enameled, glossy finish. Sold individually.

Replaces Thermos factory part# 4152741

Part Number: 55801
Dimension Front-to-Back: 14 23/32”
Dimension Side-to-Side: 26 5/8”
Material: porcelain steel wire
Weight: 6.2

$74.44

All Thermos Cooking Grids

461833803 (Quickset Traditional) Rock Grates

carbon steel rock grate for Thermos model 461833803.

Part Number: 96601
Dimensions: 8 7/8” x 21 1/8”
Material: steel wire
Weight: 3.3

$27.82

Rock grate for holding lava rock or ceramic briquettes for Thermos model 461833803.

Part Number: BG-39
Dimensions: 11” x 25”
Material: carbon steel
Weight: 4.0

$28.14

All Thermos Rock Grates

461833803 (Quickset Traditional) Heat Plates

Stainless steel Flame Tamers. Sold individually, number required varies. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces Thermos factory part# 4500291

Part Number: CLA-TS0035
Dimension Front-to-Back: 25 7/8”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.4

$35.10

All Thermos Heat Plates

461833803 (Quickset Traditional) Vaporiser Bar

Stainless steel Vaporiser Bar (heat plate). Fits Charbroil MasterFlame series 8000 grills, others.

Part Number: 94181
Dimension Front-to-Back: 26 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.3

$27.70

All Thermos Vaporiser Bar

461833803 (Quickset Traditional) Igniter Components

Collector box and ceramic electrode with male spade connector for models with 12112 or 11512 burners. Attaches directly to burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Thermos factory part# 5156119

Part Number: 04420
Material: ceramic
Weight: 0.1

$9.89

All Thermos Igniter Components

461833803 (Quickset Traditional) Knobs and Handles

Black control knob.

Off position D-Value: 9 o'clock
Knob diameter: 1 3/4”
Socket diameter: 8mm
Knob shaft: None

Replaces Thermos factory part# 4154470

Part Number: 04470
Dimensions: 1 7/8” x 1 7/8”
Material: plastic
Weight: 0.1

$5.77

All Thermos Knobs and Handles

461833803 (Quickset Traditional) Warming Racks

Universal warming rack. For use on grills with at least 22” inside dimension.

Part Number: AP-6A
Dimensions: 6” x 21 1/2”
Material: Chrome steel
Weight: 1.3

$17.36

All Thermos Warming Racks

461833803 (Quickset Traditional) Accessories

BBQ'er choice porcelain grill briquets. The finest available.

Self-Cleaning Porcelain Briquettes.
Made of fired porcelain for even heat transfer.
Virtually indestructible.
About 56 pieces covers approximately 310 square inches.
Made in USA .

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

$42.81

Durable 2 5/16” round briquettes

Self-cleaning
Control flare-ups while holding an even heat pattern.
About 53 pieces, covers approximately 275 sq. inches.
Fits all gas grills

Part Number: BQ-5
Weight: 7.2

$31.19

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.48

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

$25.40

$24.48

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

$16.16

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

Ideal for cooking pieces of meat or vegetables
Self basting, easy to use
Locks on spit rod with thumb screw (supplied)
6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

$19.30

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3

$6.73

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Date built: Monday, May 20 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.