Home > Uniflame Grill Models > Uniflame GBC1128WUniFlame 40,000 BTU 2-Burner Gas Grill w/ Side Burner, Black
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Uniflame grill.
Part diagrams and owners manuals for Uniflame model: GBC1128W
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Uniflame model: GBC1128W
GBC1128W Burners
Stainless steel burner for Uniflame model GBC1128W.
Replaces Uniflame factory part# 55-09-118
Part Number: 183L1
Dimensions: 13 3/4 x 5 1/2
Material: stainless steel
Weight: 0.7
$35.18
Stainless steel burner for Uniflame model GBC1128W.
Replaces Uniflame factory part# 55-09-119
Part Number: 183R1
Dimensions: 13 3/4 x 5 1/2
Material: stainless steel
Weight: 0.7
$35.18
GBC1128W Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 59211
Dimension Front-to-Back: 15 1/4
Dimension Side-to-Side: 25
Material: porcelain steel bar
Weight: 4.0
$49.91
GBC1128W Heat Plates
Porcelain steel
Heat Plate. Sold individually.
Replaces Uniflame factory part# 55-07-319
Part Number: 97331
Dimension Front-to-Back: 21 3/4
Dimension Side-to-Side: 11 3/4
Material: porcelain steel
Weight: 3.2
$47.13 $36.95
Stainless steel aftermarket
Heat Plate.
- Stainless equivalent of part 97331
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
Part Number: 97331-SS
Dimension Front-to-Back: 11 3/4
Dimension Side-to-Side: 21 3/4
Material: stainless steel
Weight: 2.2
$40.58
This stainless steel version of UFHP1
Heat Plate replaces the original porcelain steel plate for Uniflame model GBC1128W.
Part Number: UFHP1-SS
Dimension Front-to-Back: 15
Dimension Side-to-Side: 25
Material: stainless steel
Weight: 2.5
$40.58
GBC1128W Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Uniflame factory part# 55-07-321
Part Number: 03333
Dimensions: 2 9/16 x 2
Weight: 0.5
$33.89
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 3
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Uniflame factory part# 55-07-322
Part Number: 03350
Weight: 0.7
$31.96
Push-button electronic igniter with three (3)
spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG3007
Weight: 0.2
$37.10 $14.99
Burner mounted electrode. Mounts to flange on underside of burner.
- Ceramic insulator
- Mounting bracket with nut and bolt
- 8 wire with female spade connector
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04820
Material: ceramic
Weight: 0.1
$6.81
GBC1128W Knobs and Handles
Universal black control knob. Counter-clockwise bezel.
- Off position D-Value: Selectable
- Knob diameter: 2 1/16
- Socket diameter: 8mm
- Knob shaft: None
Replaces Uniflame factory part# 55-10-126
Part Number: 01800
Dimensions: 2 1/16 x 2 1/16
Material: plastic
Weight: 0.05
$6.26
GBC1128W Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Replaces Uniflame factory part# 55-08-128
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
GBC1128W Heat indicators and Meat Thermometers
heat indicator for Uniflame model GBC1128W.
Replaces Uniflame factory part# 55-22-037
Part Number: 00017
Dimensions: 3 3/4 x 1 7/8
Weight: 0.1
$12.93
GBC1128W Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18 x 0 5/8
Material: stainless steel
Weight: 0.4
$6.64
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8 x 3 1/2
Weight: 0.7
$25.57