Viking VGBQ412T

Stainless steel smoker burner.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 15381
Dimensions: 24” x 1”
Material: stainless steel
Weight: 2.1

PA080050-R1 U-Burner with Drip Shield. Deluxe heavy duty center-fed U burner.

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shield B2004921-R (attached).
• Includes front and rear mounting brackets.

NOTE: This part is also available in more economical multipacks of two, three, and four pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking original burner part PA080050 and Drip Shield part B2004921.

Replaces Viking factory part# VIK-PA080050

Part Number: VIK-PA080050-R1
Dimensions: 21 9/16” x 6 1/8”
Material: stainless steel
Weight: 5.10

PB060049-R-X3 Porcelain Steel Cooking Grids. SET OF THREE (3) Heavy duty grates with solid 5/16” steel rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”COOKING GRIDS REPL PB060028”, this grate is a replacement for earlier grid part# PB060028 and fits numerous Viking grills. See part PB060049-SS for a stainless version.

Each panel measures:

• 22 3/4” front-to-back
• 11 5/8” side-to-side

3-Piece set measures:

• 22 3/4” front-to-back
• 34 7/8” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PB060049 and PB060028.

Replaces Viking factory part# VIK-PB060049-X3

Part Number: VIK-PB060049-R-X3
Dimension Front-to-Back: 22 3/4”
Dimension Side-to-Side: 34 7/8”
Material: porcelain steel wire
Weight: 27.00

PB060049SS-X3 Premium quality heavy duty stainless steel cooking grids. SET OF THREE (3). We had this grid set made as an upgrade to the Viking porcelain steel grid of the same size.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Each panel measures:

• 22 3/4” front-to-back
• 11 5/8” side-to-side

3-Piece set measures:

• 22 3/4” front-to-back
• 34 7/8” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PB060049 and PB060028.

Part Number: VIK-PB060049SS-X3
Dimension Front-to-Back: 22 3/4”
Dimension Side-to-Side: 34 7/8”
Material: stainless steel
Weight: 26.4

PB060049SS Premium quality heavy duty stainless steel cooking grid. We had this grid made as an upgrade to the Viking porcelain steel grid of the same size.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 22 3/4” front-to-back
• 11 5/8” side-to-side

NOTE: Also available in 2-packs, 3-packs, and 4-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PB060049 and PB060028.

Part Number: VIK-PB060049SS
Dimension Front-to-Back: 22 3/4”
Dimension Side-to-Side: 11 5/8”
Material: stainless steel
Weight: 8.8

PB060049-R Porcelain Steel Cooking Grids. Heavy duty grates with solid 5/16” steel rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”COOKING GRIDS REPL PB060028”, this grate is a replacement for earlier grid part# PB060028 and fits numerous Viking grills. See part PB060049-SS for a stainless version.

Each panel measures:

• 22 3/4” front-to-back
• 11 5/8” side-to-side

NOTE: Also available in 2-packs, 3-packs, and 4-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PB060049 and PB060028.

Replaces Viking factory part# VIK-PB060049

Part Number: VIK-PB060049-R
Dimension Front-to-Back: 22 3/4”
Dimension Side-to-Side: 11 5/8”
Material: porcelain steel wire
Weight: 9.0

007905-000-R Flavor Grid. Fits Viking VGBQ/VGIQ series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Flavor Grid 007905-000.

Made in USA

Replaces Viking factory part# VIK-007905-000

Part Number: VIK-007905-000-R
Dimension Front-to-Back: 21”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 2.3

Front and back burner mounting brackets for center-fed stainless U burner part# 15481 and VIKU1. Does not include screws. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: CLA-MS0059
Material: stainless steel
Weight: 0.4

shishkebob skewers

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 40240
Material: chrome steel
Weight: 0.9

Deluxe 13” basting mop with hardwood handle and cotton mop head.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7