Home > Warm Morning Grill Models > Warm Morning D4
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Warm Morning grill.
Replacement grill parts for the Warm Morning D4
D4 Burners
Stainless steel burner and venturi assembly for D4, P4, U4, U5.
Also replaces part# B070435 and B100512.
Part Number: DPP102
Material: stainless steel
Weight: 2.6
Dimensions: 9 1/2 x 17
Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 20502-725LR
Material: cast iron
Weight: 9.0
Dimensions: 15 7/8 x 8
cast iron burner head for Warm Morning model D4.
Part Number: 20502
Material: cast iron
Weight: 7.7
Dimensions: 15 7/8 x 8
Gasket kit. Round gasket fits all dual cast iron bowtie burners.
Part Number: DHK-3
Weight: 0.1
Cast iron bowtie burner and venturi assembly kit. Includes:
- Cast iron burner
- One (1) DV-8 twin venturi
- All necessary gaskets and scews.
Part Number: WDSB+DV-8
Material: cast iron
Weight: 10.3
Dimensions: 9 1/2 x 17 1/4
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.
Part Number: 10502-725LR
Material: stainless steel
Weight: 3.5
Dimensions: 15 7/8 x 8
Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.
Part Number: 10502
Material: stainless steel
Weight: 2.5
Dimensions: 15 7/8 x 8
Cast iron bowtie burner and venturi assembly kit. Includes:
- Cast iron burner
- One (1) DV-7 twin venturi
- All necessary gaskets and scews.
Part Number: WDSB+DV-7
Material: cast iron
Weight: 10.3
Dimensions: 9 1/2 x 17 1/4
D4 Venturis
Dual venturi. Does not include bracket spot-welded between venturi tubes. Includes all necessary gaskets and screws/nuts.
Part Number: 725LR
Material: zinc plated steel
Weight: 0.7
Dimensions: 4 3/4 x 3 7/16
D4 Cooking Grids
Cast iron water fall style/multiple level
cooking grids (set of 3).
Porcelain treated, glossy finish.
Part Number: 62203
Material: gloss cast iron
Weight: 17.6
Dimensions:
- Front-To-Back: 15 1/4″
- Side-To_Side: 21 3/4″
Heavy duty stainless steel
cooking grids for size 4 grill head.
- Heavy gauge 5/16 stainless rods
- Restaurant quality stainless steel
- 2 piece set
- Fits P4, D4, U4
- Same as part B101320 (was sold individually)
Part Number: DPA112
Material: Stainless steel
Weight: 12.20
Dimensions:
- Front-To-Back: 15 3/8″
- Side-To_Side: 22 1/2″
Premium quality stainless steel water fall
cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- .225 diameter solid stainless rods
- Each panel measures 15 1/4 x 11
- Overall dimensions: 15 1/4 x 22
.
Part Number: CG-21SS-X2
Material: stainless steel
Weight: 8.0
Dimensions:
- Front-To-Back: 15 1/4″
- Side-To_Side: 22″
D4 Rock Grates
Briquet Rack - This briquette rack is
porcelain enameled steel rods; however, there have been times when the manufacturer made these in stainless steel without a price difference. Fits P4/D4. See part
DPA117 for Ceramic Flare Busters.
Part Number: B067449
Material: porcelain steel
Weight: 4.8
Dimensions:
- Front-To-Back: 12 1/2″
- Side-To_Side: 20 1/8″
carbon steel
rock grate for Warm Morning model D4.
Part Number: 93001
Material: steel wire
Weight: 3.4
Dimensions:
- Front-To-Back: 12 1/4″
- Side-To_Side: 20 1/8″
D4 Heat Plates
Flare Buster Flat Ceramic Pads; consist of ten pieces, three of which are different size pieces. For P4, H4, D4. Requires B067449 Rack if replacing flavor screen.
Part Number: DPA117
Material: ceramic
Weight: 4.6
D4 Igniter Components
Collector Box (Electronic Ignitor), electrode, and connector wire with female spade end. Please refer to DPP116 Kit if ground wire needed and two screws; does include sleeve # B069743. Fits P3/P4
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B100446
Weight: 0.10
Collector Box Spacer, Fits P 3/4 D 3/4/5
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B069743
Weight: 0.01
Electronic ignitor head with two (2) male
spade connectors. Fits 3/P4/P5/D3/D4
- Uses 1 AA battery (not included)
- Requires 7/8 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B072218
Weight: 0.2
Ground Lug, Fits All Models
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B069747
Weight: 0.01
Ground wire with female spade ends for battery-operated ignitors; 12 long. Fits All Electronic Models
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: B072684
Weight: 0.05
20 Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20 wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
Collector Box Kit - (Mounts to Burner). Includes collector box/electrode/connector wire, ground wire and screws. Does not include sleeve # B069743. Fits: P3X, P4X, H3X, H4X all Q3X 2012 with H burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DPP116
Weight: .20
36 wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15 wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
D4 Knobs and Handles
Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.
- Off position D-Value: 3 o'clock
- Knob diameter: 1 5/8
- Socket diameter: 5/16
- Knob shaft: 1/2
Part Number: B070084
Weight: 0.04
D4 Heat indicators and Meat Thermometers
Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2 bolt centers. Stainless steel case.
Part Number: TG-2B
Weight: 0.2
D4 Accessories
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
Part Number: 00185
Material: stainless
Weight: .3
Ceramic briquette. Briquettes collect heat and radiate it to the food on the
cooking grids. They also help prevent flare-ups and keep the flames from actually touching the food allowing for more efficient and uniform heat distribution.
Designed primarily to work in stainless steel trays on Lynx, Alfresco, and other brand grills, these briquettes can be and often are used on any grill with an ordinary grate to support them.
- Individual briquettes measure 2 x 2
- Set includes 28 ceramic briquettes
- More than one set may be required per grill model
Part Number: BQLYX
Material: ceramic
Weight: 4.0
Dimensions: 2 x 2
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4
Deluxe 13 basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Warm Morning grill model D4. Some parts not specific to a grill brand or model like regulators, posts, and heat indicators, which are listed in our repair parts section. 02-Nov-26
|
We ship Warm Morning BBQ parts worldwide
Back to Warm Morning grill parts