Broilmaster P4 (1990s)

Stainless steel burner and venturi assembly for D4, P4, U4, U5.
Also replaces part# B070435 and B100512.

Part Number: DPP102
Dimensions: 9 1/2” x 17”
Material: stainless steel
Weight: 2.6

Cast iron ”water fall style/multiple level” cooking grids (set of 3). Porcelain treated, glossy finish.

Part Number: 62203
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 21 3/4”
Material: gloss cast iron
Weight: 17.6

Heavy duty stainless steel cooking grids for size 4 grill head.

• Heavy gauge 5/16” stainless rods
• Restaurant quality stainless steel
• 2 piece set
• Fits P4, D4, U4
• Same as part B101320

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive SPRING 24.

Part Number: DPA112
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 11 1/4”
Material: Stainless steel
Weight: 17.00

Briquet Rack - premium grade stainless steel rods. Originally, this briquet rack was made of porcelain enameled steel rods. Fits P4/D4. See part DPA117 for Ceramic Flare Busters.

Part Number: B067449
Dimensions: 12 1/2” x 20 1/8”
Material: porcelain steel
Weight: 4.8

B063065 Radiation Shield (Heat & Wind Deflector), Fits All Models.

Genuine Broilmaster fatory part. Also known as DPP7SS.

Part Number: B063065
Weight: 1.0

Flare Buster Flat Ceramic Pads; consist of ten pieces, three of which are different size pieces. For P4, H4, D4. Requires B067449 Rack if replacing flavor screen.

Part Number: DPA117
Material: ceramic
Weight: 4.6

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03500
Weight: 0.05

Collector Box (Electronic Ignitor), electrode, & connector wire with female spade end. Fits P3/P4

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B100446
Weight: 0.2

Collector Box Spacer, Fits P 3/4 D 3/4/5

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069743
Weight: 0.01

Electronic ignitor head with two (2) male spade connectors. Fits 3/P4/P5/D3/D4

• Uses 1 AA battery (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072218
Weight: 0.2

Ground Lug, Fits All Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B069747
Weight: 0.01

Ground Wire, Fits All Electronic Models

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: B072684
Weight: 0.1

Knob, Black (New Style), Fits P3/4/4, SR3, D3/4/5/2.
Also replaces part# B070286, which no longer available.

• Off position D-Value: 3 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: B070084
Weight: 0.04

Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2” bolt centers. Stainless steel case.

Part Number: TG-2B
Weight: 0.2

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7