Home > Broilmaster Grill Models > Broilmaster SBG2501
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broilmaster grill.
Part diagrams and owners manuals for Broilmaster model: SBG2501
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Broilmaster model: SBG2501
SBG2501 Burners
Premium quality stainless steel tube burner for Broilmaster model SBG2501.
Part Number: CLA-BS0211
Dimensions: 16 13/16” x 1”
Material: stainless steel
Weight: 0.4
$29.99 $19.99
Stainless steel burner for Broilmaster model SBG2501.
Part Number: CTB1
Dimensions: 16 7/8
Material: stainless steel
Weight: 1.0
$35.23
Rotisserie Burner Back Cover, fits SBG2501 for Broilmaster model SBG2501.
Part Number: SBB00057
Weight: 1.0
Image not available
$8.03
Rotisserie burner. Orifice and fitting not included. Best if used with original orifice and fitting. (If a new orifice and fitting is needed, please indicate that during check-out in the comment section.)
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive SPRING 24.
Part Number: SBB00061
Dimensions: 3 1/4” x 12 3/8”
Weight: 2.0
$67.90
Stainless steel tube burner for Broilmaster model SBG2501.
Part Number: SBB00051
Dimensions: 17” x 1”
Material: stainless steel
Weight: 0.4
$21.36
SBG2501 Cooking Grates
Replacement for SBB00055,
porcelain treated flat matte finish cast iron cooking grate, fits SBG2501. Sold individually, used in sets of two.
NOTE: Original version was cast iron. Later manufacturer replaced with stainless steel, which has been discontinued.
Part Number: SBB00055-R
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 8.2
$64.00
SBG2501 Heat Plates
Stainless steel Flame Tamer , fits SBB2804 for Broilmaster model SBG2501.
Part Number: SBB00102
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 0.95
$41.51
SBG2501 Igniter Components
Rotisserie Electrode, fits SBG2501, SBG2801
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: SBB00060
Weight: 0.2
$10.64
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03342
Weight: 0.3
$31.50
SBG2501 Knobs and Handles
Genuine OEM control knob..
- Off position D-Value: 6 or 12 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 8mm
- Knob shaft: none (flat)
Part Number: 472-C565
Weight: 0.1
$8.15
SBG2501 Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60