Home > Charmglow Grill Models > Charmglow 401K
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Charmglow grill. This is best done with the old parts out of the grill. Verify your Charmglow grill model number.
Replacement grill parts to fit Charmglow model: 401K
401K Cooking Grids
Chrome steel
cooking grid. Sold individually.
Part Number: 41301
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 22”
Material: chrome steel wire
Weight: 3.7
$40.67
Premium quality stainless steel
cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- .225 diameter solid stainless rods
- Each panel measures 14 1/2” x 10 1/2”
- Overall dimensions: 14 1/2” x 21”
.
Part Number: CG-50SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6
$85.75
Commercial 304 grade stainless steel
cooking grid with 1/4” diameter rods. Sold individually. Made in USA
.
Part Number: CG-53SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5
$68.90
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
NOTE:This single-piece part also replaces some two-piece grid sets.
Part Number: 51402-SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5
$68.90
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2) panels
Each panel measures:- Front-to-Back: 14 1/2”
- Side-to-Side: 10 1/2”
Total Side-to-Side: 21”Part Number: 51702-SS-X2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 21”
Material: stainless steel
Weight: 5.6
$85.75
Premium stainless steel cooking grid. Far superior to porcelain coated steel grids. SOLD INDIVIDUALLY.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold individually
Part Number: 51702-SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.8
$46.47
401K Rock Grates
carbon steel
rock grate for Charmglow model 401K.
Part Number: 91601
Dimensions: 12 1/2” x 21 11/32”
Material: steel wire
Weight: 3.8
$25.03
401K Valves, Orifices, and Manifolds
45° angled valve with extra long orifice snout. Accepts 11/32” x 32 threaded
spud orifice (not included, see part# 33200). Mounts to left side of T manifold 38400. (39000 mounts to right side). Assembly MCM 32354 replaces Sunbeam OEM #40-2354.
Part Number: 38900
Material: brass
Weight: 0.3
$20.33
Brass
spud orifice with 11/32” x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01
$7.57
Right valve of assembly 37000. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models.
D-Value is 6 o'clock
Part Number: 37400
Material: brass
Weight: 0.3
$26.66
401K Accessories
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA .
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
$42.81
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65
$53.43 $47.71
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60