Home > Weber Grill Models > Weber Spirit 500
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Weber grill.
Replacement gas grill parts for Weber model: Spirit 500
Spirit 500 Burners
Complete stainless steel burner assembly kit for Weber Silver A and Spirit 500 models.
Includes:
- Two (2) part# WTB-SAF 27” front and rear burners
- One (1) WTB-SACT 10 1/2” crossover tube
Part Number: WTB3
Dimensions: 27
Material: stainless steel
Weight: 2.05
$60.18
Stainless steel cross-over tube for Silver A and Spirit 500 grills. See part# WTB3 for complete burner kit.
Part Number: WTB-SACT
Dimensions: 10 9/16”
Material: stainless steel
Weight: 0.15
$13.92
Stainless steel front or rear burner for Weber Silver A and Spirit 500 models. See part# WTB3 for complete burner kit.
Part Number: WTB-SAF
Dimensions: 27”
Material: stainless steel
Weight: 1.0
$31.96
Spirit 500 Cooking Grids
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Fits grill by Arkla, Arklamatic, Charbroil, Charmglow, Embermatic, Great Outdoors, Kenmore, Kmart, Martha Stewart, Roper, Vermont Castings, Weber. May fit others.
Part Number: 58671-SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5
$68.90
Porcelain pressed steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 58682
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 22 3/4”
Material: porcelain pressed steel
Weight: 5.3
$58.08
Commercial 304 grade stainless steel
cooking grid with 1/4” diameter rods. Sold individually. Made in USA
.
Part Number: CG-53SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5
$68.90
Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, almost 6 pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16” solid stainless rods
- Dimensions: 15” x 11 1/8”
- Made in USA .
- Sold individually.
Part Number: CLA-GS0006
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 11 1/8”
Material: stainless steel
Weight: 5.8
$52.90
Premium stainless steel
cooking grid. Sold individually. Fits Weber Genesis Silver A, Sport 500, and Spirit E210.
Part Number: CG-82SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 11 5/16”
Material: 304 Stainless steele
Weight: 6.0
$72.93
Spirit 500 Flavor Bars
Porcelain steel Flavoriser Bars. SET OF FIVE (5).
Part Number: 95345
Dimension Front-to-Back: 21 9/16”
Dimension Side-to-Side: 1 7/8”
Material: porcelain steel
Weight: 5.3
$49.81
Spirit 500 Flavorizer Bars
Heavy gauge stainless steel Flavoriser Bars for Weber Silver A and Spirit 500 model grills using a 5 bar system. SET OF FIVE (5).
Part Number: WFB-5S
Dimension Front-to-Back: ”
Dimension Side-to-Side: 21 9/16”
Material: stainless steel
Weight: 6.0
$58.36
Spirit 500 Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Snap In
Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-9B
Weight: 0.2
$8.38
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Part Number: 03120
Weight: 0.1
$9.77
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04800
Material: ceramic
Weight: 0.2
$11.77
Spirit 500 Knobs and Handles
Control knob with long shaft.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 5/8”
- Socket diameter: 8mm
- Knob shaft: 1 1/4”
Part Number: 00120
Dimensions: 1 5/8” x 1 5/8”
Material: plastic
Weight: 0.1
$6.06
Spirit 500 Valves, Orifices, and Manifolds
Brass LP valve and orifice (part #31600) to replace Weber OEM valve #11810007. Orifice has
starter hole size #61 and must be drilled. Best to use old orifice and remove orifice included with this valve.
D-Value for knob is 3 o'clock.
Part Number: 36400
Dimensions: 3 9/16” x 2 1/4”
Material: brass
Weight: 0.5
$30.97
Spirit 500 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73