Every Heat Plate we have

Savor Plate Rack. Heavy duty, 304 premium grade stainless steel with 5/16” rods. Each rack holds three (3) P01804006A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P01717002E, which is no longer available.

Fits models:

• M5205ALP
• M5205ANG
• and others

Part Number: P01717002E-R
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 9”
Material: stainless steel
Weight: 1.0

Savor Plate Rack. Heavy duty, 304 premium grade stainless steel with 5/16” rods. Each rack holds three (3) P01804006A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P01717003E, which is no longer available.

Fits models:

• M3905ALP
• M3905ANG
• and others

Part Number: P01717003E-R
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 9”
Material: nickel plated steel
Weight: 1.0

Flame Tamer Rack for Turbo Select. Heavy duty nickel plated 5/16” steel rod. Each rack holds twelve (12) P01804004A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P01720001B, which is no longer available.

Fits models:

• YN662LP
• YN662NG
• YN663LP
• YN663NG
• and others

Part Number: P01720001B-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

Flame Tamer Rack for Grand Turbo. Heavy duty nickel plated 5/16” steel rod. Each rack holds twelve (12) P01804002A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P01720026B, which is no longer available.

Fits models:

• YN662LP
• YN662NG
• YN663LP
• YN663NG
• and others

Part Number: P01720026B-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

Nickel plated heavy duty steel 5/16” thick Flame Tamer rack. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.

Fits models:

• Regal04
• Y005XC-1
• and others

Part Number: P01722001B-R
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6

Flame Tamer Rack. Heavy duty nickel plated 5/16” steel rod. Each rack holds twelve (12) P01804001A-R ceramic flame tamers (sold separately). Also known as part number P1736A.

NOTE: This is an aftermarket part made to replace original part number P01722021B, which is no longer available.

Fits models:

• MONARCH04
• Y0660
• and others

Part Number: P01722021B-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

Ceramic Flame Tamer. Measures 7” x 8”. Box of 6.

Note: This part is used in racks P01722001B, P01722021B.

Fits models:

• Regal04ALP/NG
• MONARCH04ALP/NG
• And others

Part Number: P01804001A-R
Dimension Front-to-Back: 7”
Dimension Side-to-Side: 8”
Material: ceramic
Weight: 12.0

Ceramic Flame Tamer for Grand Turbo. Measures 7 1/2” x 4 3/4”. Box of 4.

Note: This part is used in racks P01720005B, P01720026B, P0172034B.

Fits models:

YN662LP/NG
• YN662AGLP/NG
• YN663
• And others

Part Number: P01804002A-R
Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0

Ceramic Flame Tamers for Turbo Select grills. Measures 7 1/2” x 4 3/4”. Box of 4.

Note: This part is used in racks P01720001B.

Fits models:

• G6STR
• G6STRN
• And others

Part Number: P01804004A-R
Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0

Ceramic Savor Plate. Measures 7 1/16” x 4 3/4”. Box of 4.

Note: This part is used in racks P01717003E, and P01717002E.

Fits models:

• M3905ALP
• M3905ANG
• M5205ALP
• M5205ANG
• And others

Part Number: P01804006A-R
Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0

Ceramic Flame Tamer. Measures 7” x 8”. Box of 6.

Note: This part is used in racks P1736B, P1739A, P01722021B.

Fits models:

• Y0005XC-1
• Y0005XC-2
• Y0101XC
• Y0202XC
• Y0660LP/NG
• And others

Part Number: P1736A-R
Dimension Front-to-Back: 7”
Dimension Side-to-Side: 8”
Material: ceramic
Weight: 12.0

Nickel plated heavy duty steel 5/16” thick Flame Tamer rack. Holds six ceramic Flame Tamers part # SCFT/P1736A-R (not included). This is an aftermarket part made to replace original part numbers P1736B and P01722001B, which are no longer available.

Fits models:

• Y0101XC
• Y0202XC
• and others

Part Number: P1736B-R
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 31”
Material: nickel plated steel
Weight: 5.6

Rack for ceramic Flame Tamers; nickel plated heavy duty wire 5/16” thick. Uses 12 ceramic flame tamers part# P1736A-R (not included).

NOTE: This replacement part is not exactly like the original P1739A rack, but a very functional replacement. It cannot use the original ceramic Flame Tamers. The original rack held six larger Flame Tamers, while P01720021B-R uses twelve smaller ones. Using only 10 tamers will allow the smoker burner to remain uncovered as was the case with the original rack.

Part Number: P1739A-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

Flame Tamer Rack for Grand Turbo. Heavy duty nickel plated 5/16” steel rod. Each rack holds twelve (12) P1751A-R ceramic flame tamers (sold separately).

NOTE: This is an aftermarket part made to replace original part number P1741A, which is no longer available.

Fits models:

• Y0662LP
• Y0662NG
• Y0663LP
• Y0663NG
• and others

Part Number: P1741A-R
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 33 7/16”
Material: nickel plated steel
Weight: 8.95

Ceramic Flame Tamers for Grand Turbo grills. Measures 7 1/2” x 4 3/4”. Box of 4.

Note: This part is used in racks P1741A, and P1742A.

Fits models:

• Y0662LP/NG
• Y0663LP/NG
• Y0665LP/NG
• And others

Part Number: P1751A-R
Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0

Aluminized steel radiation shield for G3, G3TX, S3, and U3. See part RSGSS for high quality stainless version of this part.

Part Number: RSG3
Dimension Front-to-Back: 8”
Dimension Side-to-Side: 16 3/4”
Material: aluminized steel
Weight: 2.0

HEAT TENT

Part Number: SB1416064130
Weight: 1.0

Heat Tent, sold individually, use one per burner.

Part Number: SB1418011003
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 4 1/8”
Material: stainless steel
Weight: 0.6

HEAT SHIELD BACK BURNER

Part Number: SB1419013308
Weight: 1.0

WIND SHIELD BACK BURNER

Part Number: SB1419013309
Weight: 1.0

Flame tamer, sold individually, two (2) required.

Part Number: SB1419014130
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 0.6

Flame Tamer. Now stainless steel, original was porcelain steel as shown in photo. Fits SBG2500.

Part Number: SBB00052
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.45

Heat Shield, Fits SBG2500

Part Number: SBB00089
Weight: 1.0

Stainless steel Flame Tamer , fits SBB2804

Part Number: SBB00102
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 0.95

Stainless steel heat plate; also referred to as a flame tamer and savor plate.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

Stainless steel heat tent. This new stainless version, far superior to the original porcelain coated bars it replaces, is shown next to the original below. While somewhat different in shape, it is a fully functional replacement and will bolt right in.


Part Number: SCHT-27
Dimension Front-to-Back: 27 11/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 2.5

Porcelainized flaremaster heat plates to fit many Sunbeam grills. Support bars included.

Part Number: SHP-4
Dimension Front-to-Back: 10 5/8”
Dimension Side-to-Side: 20 1/2”
Material: Porcelainized steel
Weight: 2.0

HEAT DISTRIBUTION PLATE

Part Number: SM20-9
Weight: 1.0

HEAT SHIELD 345/400

Part Number: SM25-9G
Weight: 1.0

Heat distribution plate for 300 series grills.

Part Number: SM27-9
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 9 1/16”
Material: galvanized steel
Weight: 1.03

Genuine OEM Smart Bar.

Note: This is also a factory replacement for part SP68-9, which has been discontinued.

Part Number: SM5072-9
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 1/8”
Material: aluminized steel
Weight: 2.6

HEAT SHIELD 500 SERIES +

Part Number: SP114-9
Weight: 2.10

HEAT SHIELD 260 CONSOLE *

Part Number: SP151-6
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 16 1/8”
Weight: 0.80

HEAT SHIELD 445

Part Number: SP213-9
Dimension Front-to-Back: ”
Dimension Side-to-Side: 23 1/2”
Weight: 1.1

SMART BAR 445 * -- 3PCS/BOX

Part Number: SP214-9
Weight: 1.0

Genuine OEM Smart Bar for 445 series grills.

Part Number: SP225-9
Dimension Front-to-Back: 14 3/8”
Dimension Side-to-Side: 5 3/8”
Material: porcelain steel
Weight: 1.25

Stainless steel version replacement for original Smart Bar SP25-9G. NOTE: The original part was porcelain coated steel. Far superior to the original, this aftermarket part is made of corrosion-resistant stainless steel for longer life.

Part Number: SP25-9G-SS
Dimension Front-to-Back: 10 1/2”
Dimension Side-to-Side: 23 3/4”
Material: stainless steel
Weight: 3.0

LOWER HEAT SHIELD FG650

Part Number: SP309-9
Weight: 1.0

SMART ROD 300 *

Part Number: SP38-6
Weight: 1.0

SMART ROD 240 *

Part Number: SP39-6
Weight: .1

HEAT SHIELD BE500 CART

Part Number: SP396-9
Weight: 1.0

Genuine OEM heat distribution plate.

Part Number: SP5034-9
Dimension Front-to-Back: 13”
Dimension Side-to-Side: 24 5/16”
Weight: 2.75

Stainless steel version of SP56-9 Smart Bar.
NOTE: The original part was porcelain coated steel. Far superior to the original, this aftermarket part is made of corrosion-resistant stainless steel for longer life.

Part Number: SP56-9-SS
Dimension Front-to-Back: 10 1/2”
Dimension Side-to-Side: 23 3/4”
Material: stainless steel
Weight: 3.0

HEAT SHIELD 260 *

Part Number: SP582-9B
Dimension Front-to-Back: 10”
Dimension Side-to-Side: 17”
Weight: 1.0

BAFFLE BE500

Part Number: SP683-9
Weight: 1.0

HEAT SHIELD BE650 CART

Part Number: SP692-9
Weight: 1.0

Burner hood (heat plate). Sold individuallly, Use one per main burner.

Part Number: SSG022
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 2 3/4”
Material: stainless steel
Weight: 0.8

This stainless steel version of UFHP1 Heat Plate replaces the original porcelain steel plate.

Part Number: UFHP1-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 25”
Material: stainless steel
Weight: 2.5

Stainless steel heat plate. Some OEM originals were porcelain coated steel. This stainless version, which resists rust and corrosion better, is far superior to original porcelain part.

Part Number: VCHP1
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 0.7

007905-000-R Flavor Grid. Fits Viking VGBQ/VGIQ series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Flavor Grid 007905-000.

Made in USA

Part Number: VIK-007905-000-R
Dimension Front-to-Back: 21”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 2.3