Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.
Broil-Mate Heat Plates
Genuine OEM Broil-Mate stainless steel Flav-R-Wave for some Broil-Mate grills.
Part Number: 10222-E400
Dimension Front-to-Back: 13 3/4
Dimension Side-to-Side: 6 1/4
Material: Stainless steel
Weight: 1.25
$25.55
| |
|
Genuine OEM Broil-Mate stainless steel Flav-R-Wave
heat plate for some Broil-Mate grills.
Part Number: 10222-T225
Dimension Front-to-Back: 16 1/2
Dimension Side-to-Side: 9 1/8
Material: stainless steel
Weight: 1.85
$19.81
| |
|
Genuine OEM Broil-Mate stainless steel Flav-R-Wave SS
heat plate for some Broil-Mate grills.
Part Number: 10222-T325
Dimension Front-to-Back: 10 3/8
Dimension Side-to-Side: 18
Material: Stainless steel
Weight: 2.4
$37.41
| |
|
Genuine OEM Broil-Mate stainless steel Flav-R-Wave
heat plate for some Broil-Mate grills. Also replaces porcelain-steel part# 10222-T424, which has been discontinued by the manufacturer.
Part Number: 10222-T425
Dimension Front-to-Back: 11 1/4
Dimension Side-to-Side: 23
Material: Stainless steel
Weight: 3.0
$48.91
| |
|
Stainless steel replacement for Flav-R-Wave OEM# 10222-T624 for some Broil-Mate grills.
Part Number: 10222-T624-R
Dimension Front-to-Back: 12 3/4
Dimension Side-to-Side: 23 3/4
Material: stainless steel
Weight: 2.0
$62.78
| |
|
Genuine OEM Broil-Mate stainless steel Flav-R-Wave
heat plate / Vaporizer for some Broil-Mate grills. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.
Part Number: 22209-904
Dimension Front-to-Back: 17 1/2
Dimension Side-to-Side: 5 7/8
Material: Stainless steel
Weight: 1.15
$21.48
| |
|
HEAT SHIELD REGULATOR SILVER -- GPB for some Broil-Mate grills.
Part Number: 338-C541
Weight: 1.0
Image not available
$4.58
| |
|
HEAT SHIELD REGULATOR GPB BLK for some Broil-Mate grills.
Part Number: 338-C541B
Weight: 1.0
Image not available
$4.40
| |
|
FIREBOX 550 HEAT SHIELD FRONT for some Broil-Mate grills.
Part Number: 52066-91
Weight: 1.0
Image not available
$29.10
| |
|
Genuine OEM Broil-Mate stainless steel Flav-R-Wave for some Broil-Mate grills.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8
Dimension Side-to-Side: 6
Material: stainless steel
Weight: 1.14
$21.93
| |
|
Heat tent 'C' stainless steel; also known as a Flav-r-Wave or
heat plate for some Broil-Mate grills.
Part Number: 52249-404
Material: stainless steel
Weight: 1.0
$11.73
| |
|
Universal adjustable stainless steel
heat plate/Flame Tamer for some Broil-Mate grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four legs in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing
heat plates/Flame Tamers if one of the four available lengths is suitable.
- Adjustable to four lengths: 19 3/4, 22 3/4, 25 3/4, 28 3/4.
- Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
- Heavy duty stainless steel.
- Hardware included
Part Number: 92375
Dimension Front-to-Back: 29
Dimension Side-to-Side: 8 1/2
Material: stainless steel
Weight: 2.2
$43.93
Universal adjustable stainless steel
heat plate/ Flame Tamer for some Broil-Mate grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12 to 18 in 1/2 increments; width is 4. Replaces many original equipment front-to-back
heat plates.
Part Number: 92381
Dimension Front-to-Back:
Dimension Side-to-Side: 4
Material: stainless steel
Weight: 0.85
$21.62
Stainless steel Flame Tamer for some Broil-Mate grills. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0087
Dimension Front-to-Back: 16 1/2
Dimension Side-to-Side: 6
Material: stainless steel
Weight: 1.0
$17.18 | |
|
Stainless steel Flav-R-Wav/Flame Tamer for some Broil-Mate grills. Made in USA
.
Part Number: CLA-TS0111
Dimension Front-to-Back: 14 1/2
Dimension Side-to-Side: 6 1/8
Material: stainless steel
Weight: 0.9
$20.72
| |
|
Stainless steel
Heat Plate; also known as a Flame Tamer and Smart Bar for some Broil-Mate grills. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2
Dimension Side-to-Side: 7 3/16
Material: stainless steel
Weight: 1.6
$46.73
| |
|
Genuine OEM Broil-Mate Smart Bar for some Broil-Mate grills.
Note: This is also a factory replacement for part SP68-9, which has been discontinued.
Part Number: SM5072-9
Dimension Front-to-Back: 19 1/2
Dimension Side-to-Side: 7 1/8
Material: aluminized steel
Weight: 2.6
$27.45
| |
|
