Heat Plates for Kenmore grills

Porcelain steel Flame Tamer for some Kenmore grills. Sold individually.

Part Number: 90171
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.10

Porcelain steel Flame Tamer for some Kenmore grills. Also known as a Heat Diffuser. Sold individually.

Part Number: 90681
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 4 5/8”
Material: porcelain steel
Weight: 0.7

Porcelain steel heat tent for some Kenmore grills. Sold individually.

Part Number: 91091
Dimension Front-to-Back: 26 15/16”
Dimension Side-to-Side: 6 1/8”
Material: porcelain steel
Weight: 2.5

Porcelain steel heat tent for some Kenmore grills. Sold individually.

Part Number: 91111
Dimension Front-to-Back: 20 5/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.5

Porcelain steel Flame Tamer for some Kenmore grills. Sold individually.

Part Number: 91191
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 4 3/16”
Material: porcelain steel
Weight: 0.9

Stainless steel aftermarket flame tamer heat plate for some Kenmore grills.

• Stainless equivalent of part 91191
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 91191-SS
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 1.0

Porcelain steel Heat Diffuser for some Kenmore grills. Sold individually.

Part Number: 91521
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 4 1/8”
Material: porcelain steel
Weight: 1.0

Porcelain steel Heat Diffuser for some Kenmore grills. Sold individually.

Part Number: 91621
Dimension Front-to-Back: 11 7/8”
Dimension Side-to-Side: 4 1/8”
Material: porcelain steel
Weight: 0.7

Porcelain steel heat plate for some Kenmore grills. Sold individually.

Part Number: 91631
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0

Porcelain steel Heat Plate for some Kenmore grills. Sold individually.

Part Number: 92071
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 1.0

Porcelain steel Heat Tent for some Kenmore grills. Sold individually.

Part Number: 92081
Dimension Front-to-Back: 18 1/2”
Dimension Side-to-Side: 6 1/8”
Material: porcelain steel
Weight: 1.8

Stainless steel burner tent and frame for some Kenmore grills.

Part Number: 92261
Dimension Front-to-Back: 6”
Dimension Side-to-Side: 6”
Material: chrome steel
Weight: 0.9

Universal adjustable stainless steel heat plate/Flame Tamer for some Kenmore grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Universal adjustable stainless steel heat plate/ Flame Tamer for some Kenmore grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

Flavoriser Bars for some Kenmore grills. Porcelain enameled steel, set of 5.

Part Number: 92451
Dimension Front-to-Back: 24 1/2”
Dimension Side-to-Side: 2 5/8”
Material: porcelain steel
Weight: 8.0

Stainless steel aftermarket Flavoriser Bars, set of five, for Weber Genesis E series grills for some Kenmore grills.

• Stainless equivalent of part 92451
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Set of five (5)
• Made in USA

Part Number: 92451-SS
Dimension Front-to-Back: 24 1/2”
Dimension Side-to-Side: 2 5/8”
Material: stainless steel
Weight: 2.0

Porcelain steel Heat Diffuser for some Kenmore grills. Sold individually. Also known as a Flame Tamer.

Part Number: 93051
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 4 15/16”
Material: porcelain steel
Weight: 1.6

Porcelain steel Flame Tamer for some Kenmore grills. Sold individually.

Part Number: 93321
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 1.0

Stainless steel aftermarket Flame Tamer heat plate for some Kenmore grills.

• Stainless equivalent of part 93321
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 93321-SS
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.7

Stainless steel Flavorisor bars for Weber for some Kenmore grills. Set of 5.

Part Number: 94101
Dimension Front-to-Back: 22 9/16”
Dimension Side-to-Side: 2 1/4”
Material: stainless steel
Weight: 7.0

Stainless steel Vaporiser Bar (heat plate) for some Kenmore grills. Fits Charbroil MasterFlame series 7000 grills, others.

Part Number: 94171
Dimension Front-to-Back: 23 7/16”
Dimension Side-to-Side: 2 1/2”
Material: stainless steel
Weight: 0.6

Stainless steel Vaporiser Bar (heat plate) for some Kenmore grills. Fits Charbroil MasterFlame series 8000 grills, others.

Part Number: 94181
Dimension Front-to-Back: 26 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.3

Stainless steel Vaporiser Bar (heat plate) for some Kenmore grills. Fits Charbroil MasterFlame series 6000 grills, others.

Part Number: 94191
Dimension Front-to-Back: 21 11/16”
Dimension Side-to-Side: 2 1/2”
Material: stainless steel
Weight: 0.6

Porcelain steel Heat Diffuser for some Kenmore grills. Sold individually.

Part Number: 94481
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 5 3/4”
Material: porcelain steel
Weight: 1.1

Porcelain steel Flame Tamer for some Kenmore grills. Sold individually.

Part Number: 94491
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 5 3/4”
Material: porcelain steel
Weight: 1.1

Stainless steel aftermarket Flame Tamer for some Kenmore grills.

• Stainless equivalent of part 94491
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 94491-SS
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 0.7

Porcelain steel Vaporiser Tent for some Kenmore grills. Sold individually.

Part Number: 94631
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 5/8”
Material: porcelain steel
Weight: 1.0

Porcelain steel heat plate for some Kenmore grills. Sold individually.

Part Number: 95051
Dimension Front-to-Back: 18 15/16”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 1.2

Porcelain steel Heat Diffuser for some Kenmore grills. Sold individually.

Part Number: 95211
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 4 11/16”
Material: porcelain steel
Weight: 1.0

Stainless steel Heat Diffuser for some Kenmore grills. Sold individually.

Part Number: 95611
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 0.9

Porcelain steel Heat Diffuser for some Kenmore grills. Sold individually.

Part Number: 96221
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

Porcelain steel Heat Diffuser for some Kenmore grills. Sold individually.

Part Number: 96231
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

Porcelain steel Flame Tamer for some Kenmore grills. Sold individually.
Also known as part number G550-0006-W1.

Part Number: 96281
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 1.0

Stainless steel aftermarket flame tamer for some Kenmore grills.

• Stainless equivalent of part 96281
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Alao known as part number G550-0006-W1.

Part Number: 96281-SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.6

Porcelain steel Flavor Activator for some Kenmore grills. Sold individually.

Part Number: 96301
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 6 1/8”
Material: porcelain steel
Weight: 1.5

Porcelain steel Savor Plate for some Kenmore grills. Sold individually.

Part Number: 97041
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 3 5/16”
Material: porcelain steel
Weight: 1.2

Porcelain steel Flame Tamer for some Kenmore grills. Sold individually.

Part Number: 97061
Dimension Front-to-Back: 13 1/8”
Dimension Side-to-Side: 10 9/16”
Material: porcelain steel
Weight: 4.9

Porcelain steel Heat Diffuser for some Kenmore grills. Sold individually.

Part Number: 97071
Dimension Front-to-Back: 15 5/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 1.0

Porcelain steel Flame Tamer for some Kenmore grills. Sold individually.

Part Number: 97371
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 0.55

Porcelain steel Flame Tamers for some Kenmore grills. SET OF SIX.

Part Number: 97371-6X
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

Stainless steel Flame Tamer for some Kenmore grills. Sold individually.

Part Number: 97461
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 0.7

Porcelain enameled steel heat plate for some Kenmore grills.

Part Number: 98401
Dimension Front-to-Back: 6 1/8”
Dimension Side-to-Side: 23 13/16”
Material: porcelain steel
Weight: 1.13

Porcelain steel Heat Diffuser for some Kenmore grills. Sold individually.

Part Number: 98521
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 0.8

Porcelain steel Heat Tent for some Kenmore grills. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.

This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.

Part Number: 98531
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 0.6

Stainless steel aftermarket vented Heat Tent for some Kenmore grills.

• Stainless equivalent of part 98531
• Sold individually
• Made in USA

Part Number: 98531-SS
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.7

Stainless steel heat plate for some Kenmore grills.

Part Number: BBQHP1
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 0.7

Stainless steel Heat Tent/ Flame Tamer for some Kenmore grills. Sold individually, number required varies.

Part Number: BMHP8
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 9/16”
Material: stainless steel
Weight: 0.5

Stainless steel VapoRiser Bar (V-Bar) for some Kenmore grills. Sold individually, number required varies. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0024
Dimension Front-to-Back: 5 1/2”
Dimension Side-to-Side: 23 3/8”
Material: stainless steel
Weight: 2.3

Stainless steel Flame Tamers for some Kenmore grills. Sold individually, number required varies. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0035
Dimension Front-to-Back: 25 7/8”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.4

Heavy duty 304 grade stainless steel Heat Distribution Plate/Flame Tamer for some Kenmore grills. Sold individually, number required varies. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0051
Dimension Front-to-Back: 13 11/16”
Dimension Side-to-Side: 11 1/4”
Material: stainless steel
Weight: 2.75

Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0129
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 7 3/8”
Material: stainless steel
Weight: 1.8

Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0130
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.60

Stainless steel heat plate/Flame Tamer for some Kenmore grills.

• Sold individually
• Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0133
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.58

Stainless steel Flame Tamer for some Kenmore grills. Made in the USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: CLA-TS0137
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 5/16”
Material: stainless steel
Weight: 1.19

Flame Tamer, stainless steel for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0141
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.98

SET OF FOUR/4 PACK Flame Tamer, stainless steel for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0141-X4
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 3.92

Stainless steel heat plate for some Kenmore grills. Made in USA .

Note: Not identical to original, but a fully functional replacement.

Note: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0144
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 0.60

SET OF THREE/3 PACK Stainless steel heat plate for some Kenmore grills. Made in USA .

Note: Not identical to original, but a fully functional replacement.

Note: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0144-X3
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.8

Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0146
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 0.8

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0146-X3
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 2.4

Stainless steel Heat Distribution Plate for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 0.54

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.16

SET OF FIVE/5 PACK Stainless steel Heat Distribution Plates for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X5
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.7

Stainless steel heat diffuser for some Kenmore grills. On some grill models it is also known as a Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 1.35

SET OF THREE/3 PACK Stainless steel heat diffuser for some Kenmore grills. On some grill models it is also known as a Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0153
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 5/8”
Material: stainless steel
Weight: 0.8

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0153-X4
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 5/8”
Material: stainless steel
Weight: 3.2

Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0154
Dimension Front-to-Back: 13 3/16”
Dimension Side-to-Side: 10 5/8”
Material: stainless steel
Weight: 1.92

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0154-X3
Dimension Front-to-Back: 13 3/16”
Dimension Side-to-Side: 10 5/8”
Material: stainless steel
Weight: 5.76

Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 0.72

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.77

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X4
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.08

SET OF FIVE/5 PACK Stainless steel heat plate/Flame Tamer for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X5
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.85

Right heat diffuser for some Kenmore grills.

• Stainless steel
• Replaces OEM part# 40200011l
• Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0178
Dimension Front-to-Back: 14 13/16”
Dimension Side-to-Side: 4 13/16”
Material: stainless steel
Weight: 1.25

Heat diffuser for some Kenmore grills.

• Replaces OEM part# 40800023
• Stainless steel
• Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0179
Dimension Front-to-Back: 14 13/16”
Dimension Side-to-Side: 4 13/16”
Material: stainless steel
Weight: 0.80

Stainless steel heat plate for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0193
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.65

SET OF FOUR/4 PACK Stainless steel heat plate for some Kenmore grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0193-X4
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 2.6

Stainless steel heat diffuser for some Kenmore grills.

Replaces OEM part# S1007-012E-015
• Stainless steel
• Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0213
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.60

SET OF THREE/3 PACK Stainless steel heat diffuser for some Kenmore grills.

Replaces OEM part# S1007-012E-015
• Stainless steel
• Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0213-X3
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 1.8

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for some Kenmore grills. Sold individually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

Stainless steel smart bar replacement for SP55-9 for some Kenmore grills.

Note: This is also a replacement for part SP24-9G, which has been discontinued. There is a difference in air hole alignment.
Made in USA

Part Number: CLA-TS0397
Dimension Front-to-Back: 20 3/4”
Dimension Side-to-Side: 10 1/2”
Material: stainless steel
Weight: 2.65

Stainless steel heat plate/ Flame Tamer for some Kenmore grills.
Made in USA

Part Number: KENHP1
Dimension Front-to-Back: 13 1/8”
Dimension Side-to-Side: 10 9/16”
Material: stainless steel
Weight: 1.0

Stainless steel Flame Tamer for some Kenmore grills.

Part Number: KENHP7
Dimension Front-to-Back: 17 7/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: 1.0

Stainless steel heat plate/ Flame Tamer for some Kenmore grills.

Part Number: KENMFHP1
Dimension Front-to-Back: 15 5/8”
Dimension Side-to-Side: 4 1/8”
Material: stainless steel
Weight: 0.85

Stainless steel Flame Tamer for some Kenmore grills.

Part Number: NGKHP3
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.0

Stainless steel heat plate; also referred to as a flame tamer and savor plate for some Kenmore grills.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

HEAT SHIELD 445 for some Kenmore grills.

Part Number: SP213-9
Dimension Front-to-Back: ”
Dimension Side-to-Side: 23 1/2”
Weight: 1.1

SMART BAR 445 * -- 3PCS/BOX for some Kenmore grills.

Part Number: SP214-9
Weight: 1.0

Stainless steel version replacement for original Smart Bar SP25-9G for some Kenmore grills. NOTE: The original part was porcelain coated steel. Far superior to the original, this aftermarket part is made of corrosion-resistant stainless steel for longer life.

Part Number: SP25-9G-SS
Dimension Front-to-Back: 10 1/2”
Dimension Side-to-Side: 23 3/4”
Material: stainless steel
Weight: 3.0

Genuine OEM heat distribution plate for some Kenmore grills.

Part Number: SP5034-9
Dimension Front-to-Back: 13”
Dimension Side-to-Side: 24 5/16”
Weight: 2.75

Stainless steel version of SP56-9 Smart Bar for some Kenmore grills.
NOTE: The original part was porcelain coated steel. Far superior to the original, this aftermarket part is made of corrosion-resistant stainless steel for longer life.

Part Number: SP56-9-SS
Dimension Front-to-Back: 10 1/2”
Dimension Side-to-Side: 23 3/4”
Material: stainless steel
Weight: 3.0

Stainless steel Vap-O-Riser protective burner shields for 5000 series grills for some Kenmore grills.

Part Number: VRB-5
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: ”
Material: stainless steel
Weight: 0.45

Stainless steel Vap-O-Riser protective burner shields for 6000 series grills for some Kenmore grills.

Part Number: VRB-6
Dimension Front-to-Back: 21 11/16”
Dimension Side-to-Side: ”
Material: stainless steel
Weight: 0.6

Stainless steel Vap-O-Riser protective burner shields for 9000 series grills for some Kenmore grills.

Part Number: VRB-9
Dimension Front-to-Back: 29 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.4

Stainless steel replacement Flavor Bars for Weber Genesis for some Kenmore grills. Constructed of heavy gauge stainless for long life, they are far superior to porcelain coated bars. Set of 13 pieces, five at 23 3/8”, eight at 15 7/8”.

Part Number: WFB
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 23 3/8”
Material: stainless steel
Weight: 11.4

Heavy gauge stainless steel Flavoriser Bars for Weber Silver A and Spirit 500 model grills using a 5 bar system for some Kenmore grills. SET OF FIVE (5).

Part Number: WFB-5S
Dimension Front-to-Back: ”
Dimension Side-to-Side: 21 9/16”
Material: stainless steel
Weight: 6.0