Model: EDV27-BQRL

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Barbeques Galore Grill Models > Barbeques Galore EDV27-BQRL

Barbeque's Galore Endeavor 27" LP Gas Grill with Rotisserie (by Fisher Paykel)



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Barbeques Galore grill.

Replacement grill parts for Barbeques Galore model: EDV27-BQRL


 

EDV27-BQRL Burners

304 Stainless steel 15,000 BTU infrared rotisserie burner. Burner surface 20” x 3 1/2”. For use with LP and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for natural gas or LP gas.

Dimensions:
  • Overall length, including mounting tab on one end: 21 1/2”
  • Maximum width: 3 1/2”

Replaces Barbeques Galore factory part# DCS-210357



Part Number: CLA-BS0250
Material: stainless steel and ceramic
Weight: 3.50
Dimensions: 3 1/2” x 21 1/2”

$122.70







210617-R TUBE BURNER BBQ 30 or U BURNER EDV GRILLS.
Premium quality stainless steel tube burner.

FIts older BGB30 and BGC30 series grills. Relaces original DCS part# 210617.

Replaces Barbeques Galore factory part# DCS-210617



Part Number: DCS-210617-R
Material: stainless steel
Weight: 3.9
Dimensions: 19 1/4” x 6”

$114.90








 

EDV27-BQRL Grill Racks

212427-R GRILL RACK 27D SS.

Premium quality heavy duty stainless steel grill rack. Our USA-made premium stainless cooking grids are simply the best obtainable.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

Fits BG27 and EDV27 Professional Series gas grills.

  • Replaces DCS factory part# 212427.
  • Large diameter 5/16” stainless steel rods.
  • Commercial grade polished 304 stainless steel.
  • Made in USA
  • Dimensions: 19 1/2” x 12 3/4”
  • Sold individally.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 19 1/2” x 12 3/4” grill rack/cooking grid.



Part Number: DCS-212427-R
Material: stainless steel
Weight: 8.0
Dimensions:
  • Front-To-Back: 19 1/2″
  • Side-To_Side: 12 3/4″

 $299.99

 $129.95








 

EDV27-BQRL Igniter Components

Igniter electrode kit. Sold individually. Fits both left and right hand side.
    Includes:
  • Collector box (replaces OEM part 32801 and 32210-01)
  • Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
  • Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04850
Material: ceramic
Weight: 0.2

$27.81






212333-R BATTERY IGN MODULE 9V ELTEC 4.
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.
  • Replaces factory part 212333
  • Includes 212336 Igniter switch (button)
  • Requires 9V battery (not included)
  • Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DCS-212333-R
Weight: 0.40

$62.62








 

EDV27-BQRL Regulators and Hoses

24” LP hose and regulator with QCC-1 connection.
  • For use on ”new style” QCC-1 tanks.
  • Consists of hose part# 01000 and regulator part# 00920.
  • Hose end with SAE 3/8” female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces Barbeques Galore factory part# DCS-210819P



Part Number: 80012
Weight: 0.80

$24.90








 

EDV27-BQRL Valves, Orifices, and Manifolds

Brass valve for DCS.
  • For LP and natural gas grills (see below)
  • Off position D-Value: 12 o'clock
  • Stem diameter: 8mm
  • Orifice not included
NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces Barbeques Galore factory part# DCS-210733



Part Number: 30171
Material: brass
Weight: 0.3
Dimensions: 3 7/16” x 1 5/16”

$28.55






Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.


NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Material: stainless steel and ceramic
Weight: 0.3
Dimensions: 3 3/8” x 17 1/4”

$24.42








 

EDV27-BQRL Accessories

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

  • Works with both charcoal and gas grills.
  • Easy to use and refill.
  • Long lasting cast iron.


Part Number: 00150
Material: cast iron
Weight: 3.90
Dimensions: 5 1/4” x 8 3/8”

$27.70






2 in 1 chrome plated turner / tong with PVC coated handle

Part Number: 40730
Material: chrome steel
Weight: 0.6
Dimensions: 14

$7.45






Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.



Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41






Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Weight: 1.5
Dimensions: 7 1/2” x 16”

$22.60






GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.

The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanks—perfect for grilling, camping, patio heaters, and more
Made in USA

Part Number: 00030
Weight: 0.1


$7.60







Barbeques Galore EDV27-BQRL - 02-Nov-26



We ship Barbeques Galore BBQ parts worldwide

Back to Barbeques Galore grill parts


GRILLING  ACCESSORIES

Orders for Barbeques Galore replacement grill parts of $79 and more get Free USA shipping (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy