Broil-Mate 764064

Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.

Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8

Genuine OEM Broil-Mate Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

Genuine OEM Broil-Mate cooking grid. Porcelain treated, matte finish. (Sold individually; number required varies, check your grill.)

Part Number: 52007-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 6 5/16”
Material: cast iron
Weight: 3.10

Genuine OEM Broil-Mate stainless steel Flav-R-Wave for Broil-Mate model 764064.

Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14

Genuine OEM Broil-Mate electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-E13
Weight: 0.05

Genuine OEM Broil-Mate electronic push-button 3-spade igniter.

• Uses AAA battery (not included)
• .Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-246
Weight: 0.6

Genuine OEM Broil-Mate 32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35

Grease tray 440; porcelain flatte matte finish for Broil-Mate model 764064.

Part Number: 57055-901
Dimensions: 6 3/4” x 25 7/16”
Material: porcelain steel
Weight: 1.25

GREASE PAN - 330/440/550 for Broil-Mate model 764064.

Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40

Genuine OEM Broil-Mate Porcelain Grease Pan for Broil-Mate model 764064.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Broil-Mate model 764064.

Part Number: 10472-K431
Weight: 0.1

CONTROL KNOB SMALL W/BA STRIP.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/2”

Part Number: 10472-K231
Weight: 0.1

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Wheel 6” plastic with 3/8” axle hole for Broil-Mate model 764064.

Part Number: 10892-608
Weight: 0.2

Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Broil-Mate model 764064.

Part Number: 10240-13
Weight: .10

WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”) for Broil-Mate model 764064.

Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3

VALVE ASSEMBLY 3V+SB LP for Broil-Mate model 764064.

Part Number: 59004-034
Weight: 1.0

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Cotter pin for Broil-Mate model 764064.

Part Number: Y-11230
Weight: 0.01

Hinge pin clip for Broil-Mate model 764064.

Part Number: S21233
Weight: 0.01

SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil-Mate model 764064.

Part Number: Y-12835
Weight: 1.0

LID BUMPER for Broil-Mate model 764064.

Part Number: Y-11231
Weight: 0.01

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2