DCS 48DBQR

30639-1-R Smoker burner.
Stainless steel replacement smoker burner.

Fits DCS BG36, BG48, BGGA36, BGA48, BGB36, and BGB48 Professional Series grills. Replaces original DCS part# 30639-1.

.

Part Number: DCS-30639-1-R1
Dimensions: 18” x 1”
Material: stainless steel
Weight: 1.0

32217-R SS GRILL BURNER.
Premium quality stainless steel replacement tube burner.

Fits older BG27, BG36, BG48, BGA27, DCS27DS, DCS27FS, DCS36DS, DCS36E, and DCS48DS Professional Series grills by Dynamic Cooking Systems. Relaces original DCS part# 32217.

Replaces DCS factory part# DCS-32217

Part Number: DCS-32217-R
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Replaces DCS factory part# DCS-12021-2

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

32218-R Radiant.
Stainless steel Radiant. Sometimes called Radiant Tray. Fits BG27, DCS27FS, DCS36DS, DCS36E and DCS48DS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# DCS-32218
• Includes 32264 Radiant Cap/Lock & Hardware
• Premium grade 304 stainless steel
• Holds 18 ceramic rods
• Sold individually, number required varies by grill

Part Number: DCS-32218-R
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

32326-R Radiant 36DBQ/DBQR or radiant Tray.
Stainless steel Radiant. Sometimes called Radiant Tray or Radiant 36DBQ/DBQR. Fits BG36, BG48, DCS36DS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 32326
• Includes 32264 Radiant Cap/Lock & Hardware
• Premium grade 304 stainless steel
• Holds 18 ceramic rods
• Sold individually, number required varies by grill

Part Number: DCS-32326-R
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

Igniter electrode kit for use on DCS models with cast iron burners.

• Collector box
• Electrode with ceramic insulator
• 15” wire with round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces DCS factory part# DCS-13012-6

Part Number: 06020
Material: ceramic
Weight: 0.2

Igniter electrode kit. Sold individually. Fits both left and right hand side.

Includes:
• Collector box (replaces OEM part 32801 and 32210-01)
• Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
• Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04850
Material: ceramic
Weight: 0.2

16190-R KIT, ROTARY IGNITER & KNOB BBQ. Single outlet rotary igniter for DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 16190
• Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-16190-R
Weight: 0.2

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces DCS factory part# DCS-13230

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-13017

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Replaces DCS factory part# DCS-18193

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5