DCS BGA36-BQARL

213467-R ASSY. WELDMENT,SMKR BRNK.

Stainless steel replacement smoker burner. Fits DCS BG36, BG48, BGA36, BGA48, BGB36, BGB48, DCS36D, and DCS48D Professional Series grills. Replaces original DCS part# 213467.

.

Part Number: DCS-213467-R1
Dimensions: 18” x 1”
Material: stainless steel
Weight: 1.0

212362-R TUBE BURNER BBQ 27/36/48 BGA.
Fits BGA27, BGA36, BGA48 Professional Series grills by Fisher & Paykel.

• Replaces original DCS part# 212362.
• Premium 304 grade stainless steel
• Sold individually

Part Number: DCS-212362-R
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Replaces DCS factory part# DCS-210357

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

212341-GRID-SS Stainless steel Cooking Grid. Made for early 36” and 48” DCS grills, these Stainless round rod grids are a perfect replacement for the original channeled grates. Fits BGA36-BQAR, BGA48-BQR Professional Series DCS grills by Fisher & Paykel.

• One grid replaces two 212341 grates.
• Commercial 304 grade stainless steel
• Large 5/16” diameter round stainless rods
• Measures 20 1/2” x 10 3/8”
• Sold individually

Made in USA

Part Number: 212341-GRID-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

212341-GRID-PC Porcelain coated steel cooking grid. Made for early 36” and 48” DCS grills, these Stainless round rod grids are a perfect replacement for the original channeled grates. Fits BGA36-BQAR, BGA48-BQR Professional Series DCS grills by Fisher & Paykel.

• One grid replaces two 212341 grates.
• Large 5/16” diameter round rods
• Measures 20 1/2” x 10 7/16”
• Sold individually

Part Number: 212341-GRID-PC
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel
Weight: 10.11

213997-R RADIANT BGA or HOUSING RADIANT BGB36-48.
Stainless steel Radiant. Fits many Professional Series grills by Fisher & Paykel.

• Replaces factory part# DCS-213997
• Includes 214046 End Cap Radiant & Hardware
• Premium grade 304 stainless steel
• Holds 18 ceramic rods
• Sold individually, number required varies by grill

Part Number: DCS-213997-R
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

214006-R Ceramic Radiant Rods. Sometimes called CERAMIC ROD 9.50 (PKD).
Ceramic radiant rods. 18 count. Fits many DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 214006
• Round ceramic rods are 9.5” long and 9/16” in diameter
• Sold as a package of 18 rods

Also available in a package of three. See part# CLA-MC0357.

Part Number: DCS-214006-R
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 2.10

Ceramic radiant rods, package of three for DCS model BGA36-BQARL.

Part Number: CLA-MC0357
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 0.6

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

Igniter electrode kit. Sold individually. Fits both left and right hand side.

Includes:
• Collector box (replaces OEM part 32801 and 32210-01)
• Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
• Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04850
Material: ceramic
Weight: 0.2

212334-R BATTERY IGN MODULE 9V ELTEC 6.
9 volt spark generator with remote push button. Fits BG36, BG48, BGA36, BGA48, BGB36, and BGB48 series Professional grills that require a 6 outlet igniter.

• Replaces factory part 212334
• Includes 212336 Igniter switch (button)
• Requires 9V battery (not included)
• Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-212334-R
Weight: 0.7

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces DCS factory part# DCS-210819P

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-210734

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

214331-R CHIP TRAY W/A.
Stainless steel chip tray.

Fits DCS BGA36, BGA48, BGB36 and BGB48 Professional Series grills. Replaces original DCS part# 214331.

.

Part Number: DCS-214331-R
Material: stainless steel
Weight: 0.40

10” Bamboo Skewers (100 pieces)

• Ideal for grilling meat and vegetables
• Soak skewers in water about 1/2 hour before using
• Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
• Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.

Part Number: 11060
Weight: 0.6

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7