Home > DCS Grill Models > DCS DCS27D-BQRNDCS Professional 27" Natural Gas Grill with Rotisserie
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your DCS grill.
Replacement grill parts to fit DCS model: DCS27D-BQRN
DCS27D-BQRN Burners
213995-R BURNER W/A.
Premium quality stainless steel replacement tube burner.
Fits BG27, BG36, BG48, BGA27, DCS27D, DCS27F, DCS36D, DCS36E, DCS48D, DCS48E Professional Series grills. Relaces original DCS part# 213995.
Replaces DCS factory part# DCS-213995
Part Number: DCS-213995-R
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9
$101.81
304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part#
CLA-VL0251 for LP, or part#
CLA-VB0246 for natural gas applications.
Dimensions:
- Maximum overall length, including mounting tab on one end: 20 7/8”
- Maximum width: 3 3/8”
Replaces DCS factory part# DCS-210357
Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50
$122.70
DCS27D-BQRN Grill Racks
212426-R GRILL RACK 27D.
Premium quality heavy duty stainless steel grill rack. Early versions of this grid were porcelain steel. Our USA-made premium stainless cooking grids are simply the best obtainable. Fits DCS27D and DCS27F 27” Professional Series gas grills.
- Replaces DCS factory part# 212426.
- Large diameter 5/16” stainless steel rods.
- Commercial grade 304 stainless steel.
- Dimensions: 19 1/2” x 12 3/4”
- Made in USA
- Sold individally.
NOTE: Some versions of this part had grid lifter notches on all four corhners, some had only one. Our part has one notch.
Part Number: DCS-212426-R
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3
$112.84 $89.99
DCS27D-BQRN Radiant Trays
213997-R RADIANT BGA or HOUSING RADIANT BGB36-48.
Stainless steel Radiant. Fits many Professional Series grills by Fisher & Paykel.
- Replaces factory part# DCS-213997
- Includes 214046 End Cap Radiant & Hardware
- Premium grade 304 stainless steel
- Holds 18 ceramic rods
- Sold individually, number required varies by grill
Part Number: DCS-213997-R
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3
$91.40
214006-R Ceramic Radiant Rods. Sometimes called CERAMIC ROD 9.50 (PKD).
Ceramic radiant rods. 18 count. Fits many DCS Professional Series grills by Dynamic Cooking Systems.
- Replaces factory part# 214006
- Round ceramic rods are 9.5” long and 9/16” in diameter
- Sold as a package of 18 rods
Also available in a package of three. See part# CLA-MC0357.
Part Number: DCS-214006-R
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 2.10
$84.87
Ceramic radiant rods, package of three for DCS model DCS27D-BQRN.
Part Number: CLA-MC0357
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 0.6
$19.35
DCS27D-BQRN Igniter Components
Igniter electrode kit.
Sold individually. Fits both left and right hand side.
Includes:- Collector box (replaces OEM part 32801 and 32210-01)
- Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
- Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04850
Material: ceramic
Weight: 0.2
$25.93
219343-R KIT, ROTARY IGNITER & KNOB BBQ.
Single outlet rotary igniter for DCS Professional Series grills by Fisher Pay& Kaypel.
- Replaces factory part# 219348
- Includes Igniter, knob, and mounting screws
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DCS-219343-R
Weight: 0.12
$16.22
DCS27D-BQRN Valves, Orifices, and Manifolds
Brass valve for DCS.
- For LP and natural gas grills (see below)
- Off position D-Value: 12 o'clock
- Stem diameter: 8mm
- Orifice not included
NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.
Replaces DCS factory part# DCS-210733
Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3
$28.50
#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.
Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3
Image not available
$22.60
#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.
Part Number: CLA-VL0251
Material: brass
Weight: 0.15
$22.60
DCS27D-BQRN Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73