DCS DCS36D-BQN

213467-R ASSY. WELDMENT,SMKR BRNK.

Stainless steel replacement smoker burner. Fits DCS BG36, BG48, BGA36, BGA48, BGB36, BGB48, DCS36D, and DCS48D Professional Series grills. Replaces original DCS part# 213467.

.

Part Number: DCS-213467-R1
Dimensions: 18” x 1”
Material: stainless steel
Weight: 1.0

213995-R BURNER W/A.
Premium quality stainless steel replacement tube burner.

Fits BG27, BG36, BG48, BGA27, DCS27D, DCS27F, DCS36D, DCS36E, DCS48D, DCS48E Professional Series grills. Relaces original DCS part# 213995.

Replaces DCS factory part# DCS-213995

Part Number: DCS-213995-R
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

212273-GRID-SS Stainless steel Cooking Grid. Made for early 36” and 48” DCS grills, these Stainless round rod grids are a perfect replacement for the original channeled grates. Fits BG36-BQAR, BG48-BQR Professional Series DCS grills by Fisher & Paykel.

• One grid replaces two 212273 grates.
• Commercial 304 grade stainless steel
• Large 5/16” diameter round stainless rods
• Measures 20 1/2” x 10 3/8”
• Sold individually

Made in USA

Part Number: 212273-GRID-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

212273-GRID-PC Porcelain coated steel cooking grid. Made for early 36” and 48” DCS grills, these Stainless round rod grids are a perfect replacement for the original channeled grates. Fits BG36-BQAR, BG48-BQR Professional Series DCS grills by Fisher & Paykel.

• One grid replaces two 212273 grates.
• Large 5/16” diameter rods
• Measures 20 1/2” x 10 7/16”
• Sold individually

Part Number: 212273-GRID-PC
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel
Weight: 10.11

Igniter electrode kit for use on DCS models with cast iron burners.

• Collector box
• Electrode with ceramic insulator
• 15” wire with round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces DCS factory part# DCS-210730

Part Number: 06020
Material: ceramic
Weight: 0.2

Igniter electrode kit. Sold individually. Fits both left and right hand side.

Includes:
• Collector box (replaces OEM part 32801 and 32210-01)
• Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
• Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04850
Material: ceramic
Weight: 0.2

219343-R KIT, ROTARY IGNITER & KNOB BBQ.
Single outlet rotary igniter for DCS Professional Series grills by Fisher Pay& Kaypel.

• Replaces factory part# 219348
• Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-219343-R
Weight: 0.12

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-210733

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1