Ducane 4005LPE

Stainless steel S style burner, left-hand for Ducane model 4005LPE.

Part Number: 124L1
Dimensions: 14 3/4” x 9 3/4”
Material: stainless steel
Weight: 1.9

Stainless steel S style burner, right-hand for Ducane model 4005LPE.

Part Number: 124R1
Dimensions: 14 3/4” x 9 3/4”
Material: stainless steel
Weight: 1.9

Stainless steel burner kit. Includes left-hand S burner 124L1, 03758 electrode, wire, and collector box.

Part Number: 13011
Dimensions: 14 3/4” x 9 3/4”
Material: stainless steel
Weight: 1.5

Stainless steel burner kit. Includes right-hand S burner 124R1, 03758 electrode, wire, and collector box.

Part Number: 13021
Dimensions: 14 3/4” x 9 3/4”
Material: stainless steel
Weight: 1.5

U burner support bracket. Replaces OEM# 20175501. Sold indivually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0057
Material: stainless steel
Weight: 0.05

C burner support bracket. Replaces OEM# G4162359. Sold indivually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0058
Material: stainless steel
Weight: 0.05

Stainless steel Sear Grid set. Replaces Ducane OEM part 20172302.

The stainless steel SEAR GRID is a 2-piece die formed part with domed runners. Each runner traps and collects the heat of the briquettes thus making your grill 30% more effective than other cooking grids. The trapped heat within each runner produces wide sear marks on the meat, thus sealing in the meat’s juices.

The SEAR GRID is made of a high quality stainless steel. Due to the heat of cooking, a discoloration of the SEAR GRID is normal and will not affect the SEAR GRID in any manner.

Part Number: 534S2
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 24 1/4”
Material: stamped stainless steel
Weight: 4.15

20172503-R LA-VA-GRATE. Stainless steel support rack for supporting ceramic briquettes.

Fits 4005, 5004, and 5005 series grill heads by Ducane. May fit other models.

• Replaces original OEM part# 20172503
• Also known as kit# B29G
• Commercial grade stainless steel

The function of the 20172503-R Lava Grate is to catch and vaporize the juices which are not absorbed by the briquettes while grilling, therefore eliminating the need for a messy and unsightly grease container. For proper operation, the grid must be level and preheated to operating temperature.

For genuine Ducane Pyromid Briquettes for this Lava Grate, see part# 20172202 .

Part Number: 20172503-R
Dimensions: 15 3/8” x 24 3/8”
Material: stainless steel
Weight: 5.8

20172202 Ducane Pyromid® briquettes. Bag of 70 high quality pyromid-shaped, flat-top ceramic pieces. These are the same OEM factory briquettes that came with your new Ducane grill

Fits Ducane 1500, 4000 and 5000 series grills, and all models using La-Va-Grate part# 20172502 or 20172503.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive mid April.

Part Number: 20172202
Dimensions: 2” x 2”
Material: ceramic
Weight: 9.75

20172503-KIT LA-VA-GRATE and Pyromid® Briquettes.

Kit includes:
• 20172503-R Stainless steel Lava Grate for supporting ceramic briquettes and lava rock.

  Fits 4000 and 5000 series grill heads by Ducane.

• 20172202 Ducane Pyromid® briquettes. Bag of 70 high quality pyromid-shaped, flat-top ceramic pieces. These are the same OEM factory briquettes that came with your new Ducane grill

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive mid April.

Part Number: 20172503-KIT
Dimensions: 15 3/8” x 24 3/8”
Material: stainless steel
Weight: 15.55

Replacement rotisserie electrode with wire, mounting bracket, and ceramic insulator for use with Ducane models with rear rotisserie. Wire connects to spark generator with female round connector. For more information, see our Help Center article: Ignition 101.

Part Number: 01134
Material: ceramic
Weight: 0.1

Rotary piezo spark generator. Three round connector leads send spark to both main burners and rotisserie burners. For use with all Ducane models with rear rotisserie burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03230
Weight: 0.2

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

Collector box, ceramic electrode, glow wire spring, and 23” wire with female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03758
Material: ceramic
Weight: 0.2

Black knob for rotary igniters for Ducane model 4005LPE.

Part Number: 03201
Weight: 0.1

Black control knob.

• Off position D-Value: 12 o'clock
• Knob diameter: 1 15/16”
• Socket diameter: 8mm
• Knob shaft: 3/4”

Part Number: 03203
Dimensions: 1 15/16” x 1 15/16”
Material: plastic
Weight: 0.1

Universal durable black phenolic lid handle with threaded brass insert. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.

Part Number: PH-2B
Dimensions: 3 1/2
Material: 6.59
Weight: .3

LP brass valve. Replaces Ducane OEM LP gas valve part# G1827566, others. Orifice not included. Use original orifice or our part #37900 drilled to size.

Part Number: 37800
Dimensions: 2 11/16” x 1 7/8”
Material: brass
Weight: 0.3

Brass hood orifice with #72 starter hole and 1/8” x 22 threading for use with valves 37700, 37800, and 38800. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 37900
Dimensions: 0 3/4” x 0 1/2”
Material: brass
Weight: 0.1

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.

Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7