Dyna-Glo DGB730SNB-D

104-13011-R-X2 Main Burner, Set of two (2). Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

• DGB390BNP
• DGB390SNP
• DGB730SNB
• M365 Series

May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.

Part Number: DG1-104-13011-R-X2
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 1.1

104-13011-R Main Burner. Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

• DGB390BNP
• DGB390SNP
• DGB730SNB
• M365 Series

May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.

Part Number: DG1-104-13011-R
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

144-13003-R-X2 Heat tent. Set of two (2). Porcelain enameled steel.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.

Part Number: DG1-144-13003-R-X2
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 1.0

144-13003-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.

Part Number: DG1-144-13003-R
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 0.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

144-13012-R-X2 Ignition electrode and ignition wire assembly. Set of two (2). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13012-R-X2
Material: ceramic
Weight: 0.2

144-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13012-R
Material: ceramic
Weight: 0.1

144-13007-R Electronic ignition. Battery powered push button ignitor. Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AAA battery (not included)
• Requires 3/4” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 144-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13007-R
Weight: 0.3

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

Replacement stainless steel grease pan with grease cup and holder. Includes side bracket and attached bottom heat shield (9 1/2” x 9 1/2”). Made in USA .

Replaces Dyna-Glo factory part# DYG-144-04013

Part Number: 144-04013-R
Dimensions: 18 3/4” x 15 7/16”
Material: stainless steel
Weight: 4.20

Replacement stainless steel ash pan with small preassembled handle. Made in USA .

Replaces Dyna-Glo factory part# DYG-154-13104

Part Number: 154-13104-R
Dimensions: 17 1/2” x 18 9/16”
Material: stainless steel
Weight: 4.15

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Replaces Dyna-Glo factory part# DYG-104-12005

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles

Part Number: 40538
Material: chrome steel
Weight: 1.1

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5