Dyna-Glo DGE486BSP-D

105-13011-R-X4 Main Burner. Set of four (4). Stainless steel. Fits Dyna-Glo DGE486, DGE530, DGF486, DGF530 and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG1-105-13011-R-X4
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 2.1

105-13011-R Main Burner. Stainless steel. Fits Dyna-Glo DGE486, DGE530, DGF486, DGF530 and M486 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 105-13011.

Part Number: DG1-105-13011-R
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 0.5

166-13002-R-X3Cooking Grate. Set of three (3) grates. Porcelain treated, matte finish cast iron grate. Sold individually.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG2-166-13002-R-X3
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: cast iron
Weight: 12.1

166-13002-R Cooking Grate. Porcelain treated, matte finish cast iron grates. Sold as a 3-piece set.

Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

This grate replaces original Dyna-Glo part 166-13002.

Part Number: DG1-166-13002-R
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 5/8”
Material: cast iron
Weight: 10.10

105-13003-R-X4 Heat tent. Set of four (4). Porcelain enameled steel..

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R-X4
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

105-13003-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

105-13012-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R-X4
Material: ceramic
Weight: 0.4

105-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R
Material: ceramic
Weight: 0.1

DG1-166-13007-R Electronic Ignitor. Battery powered push button ignitor. Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

• 1.5 volt
• Has five (5) outlets (male spade connector)
• Uses a single AAA battery (not included))
• Requires 3/4” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”.

This Electronic Ignition Module replaces original Dyna-Glo part 166-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-166-13007-R
Weight: 0.7

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Replaces Dyna-Glo factory part# DYG-104-12005

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

10” Bamboo Skewers (100 pieces)

• Ideal for grilling meat and vegetables
• Soak skewers in water about 1/2 hour before using
• Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
• Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.

Part Number: 11060
Weight: 0.6

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7