Home > Dyna-Glo Grill Models > Dyna-Glo DGE486GSP-DDyna-Glo model DGE486GSP-D 4-Burner Propane Gas Grill in Gunmetal Gray with Stainless Steel Control Panel and Side Burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Dyna-Glo grill.
Replacement BBQ grill parts for Dyna-Glo model: DGE486GSP-D
DGE486GSP-D Burners
105-13011-R-X4 Main Burner. Set of four (4). Stainless steel. Fits Dyna-Glo DGE486, DGE530, DGF486, DGF530 and M486 series grills. May fit other models.
This part replaces original Dyna-Glo burner # 105-13011.
Part Number: DG1-105-13011-R-X4
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 2.1
$111.43
105-13011-R Main Burner. Stainless steel. Fits Dyna-Glo DGE486, DGE530, DGF486, DGF530 and M486 series grills. May fit other models.
This part replaces original Dyna-Glo burner # 105-13011.
Part Number: DG1-105-13011-R
Dimensions: 16 15/16” x 1”
Material: stainless steel
Weight: 0.5
$33.45
DGE486GSP-D Cooking Grates
166-13002-R-X3Cooking Grate. Set of three (3) grates. Porcelain treated, matte finish cast iron grate. Sold individually.
Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.
This grate replaces original Dyna-Glo part 166-13002.
Part Number: DG2-166-13002-R-X3
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: cast iron
Weight: 12.1
$117.85
166-13002-R Cooking Grate. Porcelain treated, matte finish cast iron grates. Sold as a 3-piece set.
Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.
This grate replaces original Dyna-Glo part 166-13002.
Part Number: DG1-166-13002-R
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 26 5/8”
Material: cast iron
Weight: 10.10
$82.03
DGE486GSP-D Heat Tents
105-13003-R-X4 Heat tent. Set of four (4). Porcelain enameled steel..
Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 105-13003.
Part Number: DG1-105-13003-R-X4
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0
$81.54
105-13003-R Heat tent. Porcelain enameled steel. Sold individually.
Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 105-13003.
Part Number: DG1-105-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0
$23.44
DGE486GSP-D Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
105-13012-R-X4 Ignition electrode and ignition wire assembly. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.
This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG1-105-13012-R-X4
Material: ceramic
Weight: 0.4
$45.04
105-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.
This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG1-105-13012-R
Material: ceramic
Weight: 0.1
$12.47
DG1-166-13007-R Electronic Ignitor. Battery powered push button ignitor. Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.
- 1.5 volt
- Has five (5) outlets (male spade connector)
- Uses a single AAA battery (not included))
- Requires 3/4” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”.
This Electronic Ignition Module replaces original Dyna-Glo part 166-13007.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG1-166-13007-R
Weight: 0.7
$19.43
DGE486GSP-D Warming Racks
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.
- Far superior to the original porcelain coated steel rack
- Rests on your existing cooking grids.
- Solid 1/4” 304 stainless steel rods.
- Stands 3.75 inches tall.
- Made in USA .
WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?
- Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
- Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
Part Number: CLA-WS0040
Dimensions: 6 1/4” x 22 7/8”
Material: stainless steel
Weight: 4.8
$71.75
DGE486GSP-D Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3” diameter
- Requires 3/8” mounting hole
Replaces Dyna-Glo factory part# DYG-104-12005
Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2
$15.11
DGE486GSP-D Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73