Dyna-Glo DGF510SSP

70-01-180-R-X5 Main Burner. Set of five (5). Stainless steel. Fits Dyna-Glo DGF510 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 70-01-180.

Part Number: DG1-70-01-180-R-X5
Dimensions: 17 7/16” x 1”
Material: stainless steel
Weight: 3.1

70-01-180-R Main Burner. Stainless steel. Fits Dyna-Glo DGF510 series grills. May fit other models.

This part replaces original Dyna-Glo burner # 70-01-180.

Part Number: DG1-70-01-180-R
Dimensions: 17 7/16” x 1”
Material: stainless steel
Weight: 0.6

70-01-178-R Cooking Grate. Porcelain enameled glossy finish cast iron grates. Sold as a 3-piece set.

Fits Dyna-Glo DGF510 series grills. May fit other models.

This grate replaces original Dyna-Glo part 70-01-178.

Part Number: DG1-70-01-178-R
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 29 5/8”
Material: gloss cast iron
Weight: 11.3

70-01-179-R-X5 Heat tent. Set of five (5). Porcelain enameled steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R-X5
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

70-01-179-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

70-01-179-SS-X5 Heat tent. Set of five (5). Stainless steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS-X5
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 3.5

70-01-179-SS Heat tent. Stainless steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

70-03-102-R-X5 Ignition electrode and ignition wire. Set of five (5). Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-102-R-X5
Material: ceramic
Weight: 0.05

70-03-102-R Ignition electrode and ignition wire. Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-102-R
Material: ceramic
Weight: 0.05

70-03-105-R Electronic Ignitor. Battery powered push button ignitor. Fits Dyna-Glo DGF510 series grills. May fit other models.

• 1.5 volt
• Has six (6) terminals (male spade connector)
• Uses a single AA battery (not included))
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”

This Electronic Ignition Module replaces original Dyna-Glo part 70-03-105.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-105-R
Weight: 0.7

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Stainless steel grease tray; has drip hole and includes grease cup and grease cup holder. Made in USA .

Replaces Dyna-Glo factory part# DYG-70-01-186

Part Number: CLA-DS0248
Dimensions: 15” x 28 9/16”
Material: stainless steel
Weight: 4.5

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Replaces Dyna-Glo factory part# DYG-70-04-100

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7