Dyna-Glo M365GMDG14

104-13011-R-X2 Main Burner, Set of two (2). Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

• DGB390BNP
• DGB390SNP
• DGB730SNB
• M365 Series

May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.

Part Number: DG1-104-13011-R-X2
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 1.1

104-13011-R Main Burner. Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:

• DGB390BNP
• DGB390SNP
• DGB730SNB
• M365 Series

May fit other models.

This part replaces original Dyna-Glo burner # 104-13011.

Part Number: DG1-104-13011-R
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5

144-13003-R-X2 Heat tent. Set of two (2). Porcelain enameled steel.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.

Part Number: DG1-144-13003-R-X2
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 1.0

144-13003-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.

Part Number: DG1-144-13003-R
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 0.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

144-13007-R Electronic ignition. Battery powered push button ignitor. Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AAA battery (not included)
• Requires 3/4” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 144-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13007-R
Weight: 0.3

144-13012-R-X2 Ignition electrode and ignition wire assembly. Set of two (2). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13012-R-X2
Material: ceramic
Weight: 0.2

144-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13012-R
Material: ceramic
Weight: 0.1

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

Replacement stainless steel grease pan with grease cup and holder. Includes side bracket and attached bottom heat shield (9 1/2” x 9 1/2”). Made in USA .

Replaces Dyna-Glo factory part# DYG-144-04013

Part Number: 144-04013-R
Dimensions: 18 3/4” x 15 7/16”
Material: stainless steel
Weight: 4.20

Round heat indicator.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Replaces Dyna-Glo factory part# DYG-104-12005

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7