Home > Embermatic Grill Models > Embermatic 42583
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Embermatic grill.
Replacement BBQ grill parts for Embermatic model: 42583
42583 Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 10502-72502
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 3.5
$61.02
Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
Part Number: 10502
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 2.5
$55.61
Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 20502-72502
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 8.0
$66.68
cast iron burner head for Embermatic model 42583.
Part Number: 20502
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 7.7
$64.56
42583 Venturis
L-shaped twin venturi. Includes all necessary gaskets and screws/nuts.
Part Number: 72502
Dimensions: 5 1/16” x 3 1/8”
Material: zinc plated steel
Weight: 0.6
$17.13
42583 Cooking Grids
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 51302
Dimension Front-to-Back: 14 5/16”
Dimension Side-to-Side: 24”
Material: porcelain steel wire
Weight: 4.5
$68.48
Cast iron
cooking grids (set of 2).
Porcelain enameled, glossy finish. These grids have a slight bow in the middle and were designed to replace some original factory grids with this bow.
Part Number: 61702
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 24”
Material: gloss cast iron
Weight: 11.0
$95.62
Chrome/nickel plated
cooking grid. Sold individually, two (2) required. Made in USA
.
Part Number: CG-13
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 11 7/8”
Material: Chrome steel
Weight: 2.4
$28.06
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids. Fits some Arkla, Arklamatic, Charmglow, Embermatic, Kenmore, and Sterling grills. Check your model to be sure. May fit others.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2) panels
Each panel measures:- Front-to-Back: 14 3/8”
- Side-to-Side:11 3/4”
Total Side-to-Side: 23 1/2”Part Number: 51302-SS-X2
Dimension Front-to-Back: 14 3/8”
Dimension Side-to-Side: 11 3/4”
Material: Stainless steel
Weight: 3.7
$95.19
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Fits Arkla, Arklamatic, Charmglow, Embermatic, Kenmore, Sterling and more.
Part Number: 51302-SS
Dimension Front-to-Back: 14 3/8”
Dimension Side-to-Side: 11 3/4”
Material: Stainless steel
Weight: 3.7
$53.89
Premium universal cooking grids. Set of two (2). Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 15”
- Side-to-Side: 12”
Total Side-to-Side: 24”Part Number: 61702-UNI-X2
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 24”
Material: cast iron
Weight: 12.9
$100.66
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 61702-UNI-X2 for a set of two (2).
Part Number: 61702-UNI
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12”
Material: cast iron
Weight: 6.45
$56.98
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model
Part Number: CG-61P-CI
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12”
Material: cast iron
Weight: 6.45
$56.98
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- 304 commercial grade stainless steel
- .225 diameter stainless rods
- Made in USA
- Sold individually
Part Number: CG-9SS
Dimension Front-to-Back: 14 3/8”
Dimension Side-to-Side: 11 3/4”
Material: Stainless steel
Weight: 3.7
$53.89
42583 Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Embermatic model 42583.
Part Number: BG-4
Dimensions: 11 5/8” x 19”
Material: Carbon steel
Weight: 2.7
$27.40
42583 Igniter Components
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
42583 Valves, Orifices, and Manifolds
Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.
- For use with LP gas
- Includes two orifices drilled to #57 drill size
- Includes pre-assembled 45 degree angle fitting, not shown in photo
Made in USA Part Number: VLV-28
Material: brass
Weight: 1.1
$42.35
Brass
spud orifice with 5/16” x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31600
Dimensions: 0 3/8” x 0 7/16”
Material: brass
Weight: 0.01
$6.95
42583 Accessories
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65
$53.43 $47.71
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59