Home > Fiesta Grill Models > Fiesta 3000
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Fiesta grill.
Replacement grill parts for the Fiesta 3000
3000 Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 19102-79102
Dimensions: 17 1/2” x 7 9/16”
Material: stainless steel
Weight: 3.2
$61.83
Stainless steel H burner. Burner consists of two pieces, which are held together by the venturi.
Part Number: 19102
Dimensions: 17 1/2” x 7 9/16”
Material: stainless steel
Weight: 2.0
$49.81
3000 Venturis
L-shaped twin venturi. Includes all necessary gaskets and screws/nuts.
Part Number: 79102
Dimensions: 3 1/2” x 2 7/8”
Material: zinc plated steel
Weight: 0.8
$14.71
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
3000 Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Fiesta model 3000.
Part Number: BG-4
Dimensions: 11 5/8” x 19”
Material: Carbon steel
Weight: 2.7
$27.40
3000 Igniter Components
Electrode kit.
- Mounting bracket
- Electrode with ceramic insulator
- Wire with round connector
- Protective sleeve
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04300
Material: ceramic
Weight: 0.1
$8.81
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
3000 Valves, Orifices, and Manifolds
Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9
D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.
Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4
$25.15
Brass
spud orifice with 11/32” x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01
$7.57
3000 Accessories
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$22.17
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive mid April.
Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65
$53.43 $47.71
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73