Home > Fiesta Grill Models > Fiesta 3500D
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Fiesta grill.
Replacement grill parts for Fiesta model: 3500D
3500D Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 19102-79202
Dimensions: 17 1/2” x 7 9/16”
Material: stainless steel
Weight: 3.2
$64.26
Stainless steel H burner. Burner consists of two pieces, which are held together by the venturi.
Part Number: 19102
Dimensions: 17 1/2” x 7 9/16”
Material: stainless steel
Weight: 2.0
$49.81
3500D Venturis
L-shaped twin venturi. Includes all necessary gaskets and screws/nuts.
Part Number: 79202
Dimensions: 4 1/2” x 2 7/8”
Material: zinc plated steel
Weight: 0.8
$17.41
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
3500D Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Fiesta model 3500D.
Part Number: BG-4
Dimensions: 11 5/8” x 19”
Material: Carbon steel
Weight: 2.7
$27.40
3500D Igniter Components
Electrode kit.
- Mounting bracket
- Electrode with ceramic insulator
- Wire with round connector
- Protective sleeve
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04300
Material: ceramic
Weight: 0.1
$8.81
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
3500D Valves, Orifices, and Manifolds
Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9
D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.
Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4
$25.15
Brass
spud orifice with 11/32” x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01
$7.57
3500D Accessories
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$22.17
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
High quality, long lasting ceramic briquettes. 90 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 90 briquettes will cover about 562 square inches. This is an area roughly 17” x 33”. For larger grills.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA Part Number: CLA-AC0405
Dimensions: 2” x 2”
Material: ceramic
Weight: 11.7
$80.96 $72.18
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60