Grand Hall SS54

Cast iron burner for Grand Hall model SS54.

Part Number: 23801
Dimensions: 14 1/8” x 2 7/16”
Material: cast iron
Weight: 2.15

Cast iron burner for Grand Hall model SS54.

Replaces Grand Hall factory part# P02001009E

Part Number: 23311
Dimensions: 13 7/8” x 2 1/2”
Material: cast iron
Weight: 3.5

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel. Channel steel is rolled steel stamped in a U-shape; is not solid round rods.

Part Number: 538S2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 6.0

Cast iron cooking grids (set of 2). Porcelain treated, flat matte finish.

Part Number: 69112
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 23 1/4”
Material: cast iron
Weight: 9.0

Cast iron cooking grids (set of 2). Porcelain enameled, glossy finish.

Replaces Grand Hall factory part# P01615015A

Part Number: 60662
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 23 1/2”
Material: gloss cast iron
Weight: 13.14

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• 5/16” solid stainless rods
• Sold as a set of two (2).

Each panel measures:

• Front-to-Back: 17 3/8”
• Side-to-Side: 11 3/4”

Total Side-to-Side: 31 5/16”

Part Number: 53801-SS-X2
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 11 3/4”
Material: stainless steel
Weight: 15.6

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• 5/16” solid rods
• Sold individually

Fits: Beaumark, Broil-Mate, Broil King, Centro, Charbroil, Charmglow, Costco, Front Avenue, Grand Hall, Great Outdoors, Grill Chef, John Deere, Kalamazoo, Kenmore, Kmart, Martha Stewart, Master Chef, Members Mark, Nexgrill, Patio Chef, S.R.Potten, Sams, Savor Pro, Sonoma, Sure Heat, Thermos, Uniflame, Vermont Castings, Wal Mart, Walmart, Weber. May fit others.

Part Number: 53801-SS
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 11 3/4”
Material: stainless steel
Weight: 7.8

Premium universal cooking grids. Set of two (2). Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 16 15/16”
• Side-to-Side: 11 3/4”

Total Side-to-Side: 23 1/2”

Part Number: 60662-UNI-X2
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 23 1/2”
Material: cast iron
Weight: 14.30

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60662-UNI-X2 for a set of two (2).

Part Number: 60662-UNI
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 7.15

Cast iron cooking grid. Porcelain treated, flat matte finish. Sold individually, number required varies.

Part Number: 60663-1PC
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 6.7

Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 17 5/16”
• Side-to-Side: 11 11/16”

Total Side-to-Side: 23 3/8”

Part Number: 69112-UNI-X2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 3/8”
Material: cast iron
Weight: 14.7

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69112-UNI-X2 for a set of two (2) grids.

Part Number: 69112-UNI
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 11 11/16”
Material: cast iron
Weight: 7.35

Porcelain steel Flame Tamer for Grand Hall model SS54.

Replaces Grand Hall factory part# P01705006E

Part Number: 90161
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: porcelain steel
Weight: 1.4

Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0128
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: stainless steel
Weight: 1.03

Universal battery powered push button ignitor.

• 1.5 volt
• Has six (6) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Ignitor collector box with ceramic electrode and male round connector.

• Wire not included. Commonly used with wire part# 03400.
• Designed to connect to wires with round female connector.
• If used with existing wire, confirm connector type is round where wire connects to electrode.

See part 02623-X4 for a more econimical 4 pack.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Grand Hall factory part# P02609002B

Part Number: 02623
Material: ceramic
Weight: 0.2

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Grand Hall factory part# P02502134C

Part Number: IGEIB4-B
Weight: 0.3

Universal four-outlet battery powered push button ignitor.

• 1.5 volt
• Has four (4) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Grand Hall factory part# P02502134C

Part Number: 03340
Weight: 0.5

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Black control knob (Some originals may have been chrome).

• Off position D-Value: 12 o'clock
• Knob diameter: 2 3/16”
• Socket diameter: 6mm
• Knob shaft: None

Replaces Grand Hall factory part# P03411011C

Part Number: 03430
Dimensions: 2 3/16” x 2 3/16”
Material: plastic
Weight: 0.2

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces Grand Hall factory part# P03601003A

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3