Home > Huntington Grill Models > Huntington 366264
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Replacement grill parts to fit Huntington model: 366264
366264 Burners
Genuine OEM Huntington stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Genuine OEM Huntington Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
366264 Cooking Grids
Genuine OEM Huntington
cooking grid.
Porcelain treated, matte finish. (Sold individually; number required varies, check your grill.)
Part Number: 52007-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 6 5/16”
Material: cast iron
Weight: 3.10
$33.20
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 12 3/4”
Material: cast iron
Weight: 6.75
Image not available
$43.13
366264 FLAV-R-WAVE
Genuine OEM Huntington stainless steel Flav-R-Wave for Huntington model 366264.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
366264 Igniter Components
COLLECTOR BOX ASSEMBLY 625
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52226-014A
Weight: 1.0
Image not available
$12.82
Genuine OEM Huntington electronic push-button 4-spade igniter.
- Uses AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-247
Weight: 0.5
$18.48
Genuine OEM Huntington electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
366264 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
GREASE PAN - 330/440/550 for Huntington model 366264.
Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40
$15.11
Genuine OEM Huntington Porcelain Grease Pan for Huntington model 366264.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
366264 Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Huntington model 366264.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
$5.15
366264 Heat indicators and Meat Thermometers
Genuine OEM Huntington Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
366264 Miscellaneous Repair Parts
Washer for Huntington model 366264.
Part Number: S21255
Weight: 0.01
$1.08
Cotter pin for Huntington model 366264.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for Huntington model 366264.
Part Number: S21233
Weight: 0.01
$1.08
366264 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Huntington model 366264.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Huntington model 366264.
Part Number: Y-11231
Weight: 0.01
$1.08
366264 Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59