Home > Huntington Grill Models > Huntington 6133-86Huntington Rebel 613386 5-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Replacement grill parts for the Huntington 6133-86 (Rebel)
6133-86 (Rebel) Cooking Grids
Genuine OEM Huntington cast iron
cooking grid 330/440/550 Grid measures 17.48” x 6 for Huntington model 6133-86.17”.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
Part Number: 52005-281
Dimension Front-to-Back: 17 7/16”
Dimension Side-to-Side: 6 3/16”
Material: cast iron
Weight: 5.5
$39.97
6133-86 (Rebel) FLAV-R-WAVE
Genuine OEM Huntington stainless steel Flav-R-Wave for Huntington model 6133-86.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
6133-86 (Rebel) Igniter Components
For front top and bottom collector box; new design by manufacturer, a single piece replacing a combo set top & bottom. Fits 5-burner grills. Replaces OEM number 22226-014A and also numbers 22226-014 and 22216-014.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 22026-903
Dimensions: 28
Weight: 1.6
$33.73
Genuine OEM Huntington push-button electronic ignitor.
- 5 spark outlets (spade connectors)
- Uses AAA battery (not included)
- Requires 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-251
Weight: 0.5
$19.43
Genuine OEM Huntington electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
Genuine OEM Huntington 32” wire for side burner and other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T18
Dimensions: 32
Weight: 0.05
$4.42
6133-86 (Rebel) Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
Genuine OEM Huntington Porcelain Grease Pan for Huntington model 6133-86.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
6133-86 (Rebel) Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Huntington model 6133-86.
Part Number: 10472-K431
Weight: 0.1
$5.15
6133-86 (Rebel) Wheels and Castors
CASTER BRACKET 21 3/4” LONG for Huntington model 6133-86.
Part Number: 21039-911
Weight: 2.05
Image not available
$18.50
Rubber castor, 3” w/plate, locking for Huntington model 6133-86.
Part Number: 10892-23
Weight: 0.66
$6.87
CASTER 3” RUBBER W/LEG LEVEL for Huntington model 6133-86.
Part Number: 10892-285
Weight: 1.0
$13.77
6133-86 (Rebel) Heat indicators and Meat Thermometers
Genuine OEM Huntington Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
6133-86 (Rebel) Miscellaneous Repair Parts
LARGE PATRIOT NAMEPLATE for Huntington model 6133-86.
Part Number: 44089-60
Weight: 1.0
Image not available
$14.45
REAR BURNER SPRING for Huntington model 6133-86.
Part Number: S21362
Weight: 1.0
$1.08
Hinge pin clip for Huntington model 6133-86.
Part Number: S21233
Weight: 0.01
$1.08
6133-86 (Rebel) Hardware
LID BUMPER for Huntington model 6133-86.
Part Number: Y-11231
Weight: 0.01
$1.08
6133-86 (Rebel) Side Burners
SIDE BURNER GRID BLK 330/440/550. Grid for side burner. 9” diameter round and has two support prongs. Porcelain coated, glossy finish.
Note: Some owners manuals incorrectly list this part as 53139-98.
Part Number: 53140-981
Weight: .8
Image not available
$18.38
6133-86 (Rebel) Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96