Home > Huntington Grill Models > Huntington 6311-23
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Replacement grill parts for the Huntington 6311-23
6311-23 Burners
Stainless steel twin oval burner and venturi assembly. Fits some Broil-Mate and Fiesta 300 series grills. Includes
- SS Oval burner
- Two (2) twist-in venturis with integrated spider guards
- Ceramic electrode and wire
Part Number: SM190A-12
Material: stainless steel
Weight: 1.3
$52.07
Genuine OEM Huntington Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
6311-23 Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
6311-23 Cooking Grids
Genuine OEM Huntington porcelain steel
cooking grid.
Note: This is also a factory replacement for part SP43-3, which has been discontinued.
Part Number: SP43A-3
Dimension Front-to-Back: 13 1/4”
Dimension Side-to-Side: 21 3/8”
Material: porcelain steel
Weight: 3.0
$33.28
6311-23 Smart Bars
Genuine OEM Huntington Smart Bar.
Note: This is also a factory replacement for part SP68-9, which has been discontinued.
Part Number: SM5072-9
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 1/8”
Material: aluminized steel
Weight: 2.6
$27.45
Stainless steel
Heat Plate; also known as a Flame Tamer and Smart Bar. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 3/16”
Material: stainless steel
Weight: 1.6
$46.73
6311-23 Igniter Components
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
Genuine OEM Huntington snap-on electrode, wire, and collector box assembly.
Note: This part does not fit our after-market burners such as 19002.
This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: SP5016-20
Weight: 0.05
$8.40
Genuine OEM Huntington push button igniter. For two-wire grills with second wire for side burner. Wires not included.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-22
Weight: 0.2
$8.19
Genuine OEM Huntington 28” wire for side burner. One female
spade connector, one female
round connector..
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T16
Dimensions: 28
Weight: 0.05
$4.50
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
6311-23 Grease Trays
Mini grease bucket used with wire holder S15111 for Huntington model 6311-23.
Part Number: S15112
Weight: .03
$2.83
Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA Part Number: S15111
Material: stainless steel
Weight: 0.02
$3.11
6311-23 Knobs and Handles
Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid for Huntington model 6311-23.
Part Number: SP5001-40
Weight: .03
Image not available
$2.89
6311-23 Regulators and Hoses
HOSE SIDE BRNR W/.079 ORIFICE
Part Number: S13467-079
Weight: 1.0
Image not available
$24.42
6311-23 Wheels and Castors
Wheel 6” plastic with 3/8” axle hole for Huntington model 6311-23.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Huntington model 6311-23.
Part Number: 10240-13
Weight: .10
$2.23
6311-23 Warming Racks
Genuine OEM Huntington chrome steel warming rack for Huntington model 6311-23.
Part Number: SP5022-3
Dimensions: 25 3/8”
Material: chrome steel
Weight: 2.5
$27.72
6311-23 Miscellaneous Repair Parts
HEAT SHIELD FIESTA 240/300 -- (2011) for Huntington model 6311-23.
Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46
$19.83
Cotter pin for Huntington model 6311-23.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for Huntington model 6311-23.
Part Number: S21233
Weight: 0.01
$1.08
6311-23 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Huntington model 6311-23.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
6311-23 Cart Parts
LEG EXTENSION OFF-SET for Huntington model 6311-23.
Part Number: 11494-148
Weight: 0.05
Image not available
$1.95
6311-23 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60