Home > Huntington Grill Models > Huntington 6835-24
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Replacement BBQ grill parts for Huntington model: 6835-24
6835-24 Burners
Genuine OEM Huntington stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Genuine OEM Huntington Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
6835-24 Cooking Grids
COOKING GRID SINGLE SS 330/440/550; SOLD INDIVIDUALLY for Huntington model 6835-24.
Part Number: 52005-284
Dimension Front-to-Back: 17 7/16”
Dimension Side-to-Side: 6 5/16”
Material: stainless steel
Weight: 3.2
Image not available
$47.90
6835-24 FLAV-R-WAVE
Genuine OEM Huntington stainless steel Flav-R-Wave for Huntington model 6835-24.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
6835-24 Heat Shields
FIREBOX 550 HEAT SHIELD FRONT for Huntington model 6835-24.
Part Number: 52066-91
Weight: 1.0
Image not available
$29.10
6835-24 Igniter Components
Genuine OEM Huntington electronic push-button 4-spade igniter.
- Uses AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-247
Weight: 0.5
$18.48
Genuine OEM Huntington electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
6835-24 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
Genuine OEM Huntington Porcelain Grease Pan for Huntington model 6835-24.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
6835-24 Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Huntington model 6835-24.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
$5.15
6835-24 Wheels and Castors
Rubber castor, 3” w/plate, locking for Huntington model 6835-24.
Part Number: 10892-23
Weight: 0.66
$6.87
6835-24 Heat indicators and Meat Thermometers
Genuine OEM Huntington Heat indicator. About 1 7/8” wide and 1 7/16” high. The threaded stem is about 5/16” diameter and 1 1/8” long.
Part Number: 10571-5
Dimensions: 1 7/8” x 1 7/16”
Weight: 0.1
$15.11
6835-24 Miscellaneous Repair Parts
LARGE PATRIOT NAMEPLATE for Huntington model 6835-24.
Part Number: 44089-60
Weight: 1.0
Image not available
$14.45
Washer for Huntington model 6835-24.
Part Number: S21255
Weight: 0.01
$1.08
Hinge pin clip for Huntington model 6835-24.
Part Number: S21233
Weight: 0.01
$1.08
6835-24 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Huntington model 6835-24.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Huntington model 6835-24.
Part Number: Y-11231
Weight: 0.01
$1.08
6835-24 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73