Home > Kenmore Grill Models > Kenmore 119.16312800Kenmore 4-Burner LP Gas Grill with side and rear burners
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Part diagrams and owners manuals for Kenmore model: 119.16312800
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit Kenmore model: 119.16312800
119.16312800 Burners
Stainless steel tube burner.
Includes:
WARNING: Measure your existing burners before purchasing replacements to determine the length you need. For reasons unknown to us, some versions of this grill model (GR2150901-MM-00) use the 15 3/8 16231 burner, while others use the 17 1/2 16261 burner. Measure and order accordingly.
Part Number: 16231
Dimensions: 15 3/8 x 1
Material: stainless steel
Weight: 0.50
$34.77
119.16312800 Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Part Number: 63113
Dimension Front-to-Back: 18 3/4
Dimension Side-to-Side: 24 3/4
Material: gloss cast iron
Weight: 15.12
$104.92
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60193-UNI-X3 for a set of three (3).
Part Number: 60193-UNI
Dimension Front-to-Back: 18 3/4
Dimension Side-to-Side: 9 1/2
Material: cast iron
Weight: 6.45
$51.52
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 65131-UNI
Dimension Front-to-Back: 18 3/4
Dimension Side-to-Side: 7 5/8
Material: cast iron
Weight: 5.55
$33.23
119.16312800 Heat Diffusers
Porcelain steel Heat Diffuser. Sold individually.
Replaces Kenmore factory part# S1007-012E-016
Part Number: 91521
Dimension Front-to-Back: 16 1/4
Dimension Side-to-Side: 4 1/8
Material: porcelain steel
Weight: 1.0
$23.44
119.16312800 Igniter Components
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.
Part Number: 04022
Material: ceramic
Weight: 0.1
$6.81
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
46 Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
119.16312800 Knobs and Handles
Chrome and black plastic control knob.
- Off position D-Value: 12 o'clock
- Knob diameter: 2 5/16
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 02340
Dimensions: 2 5/16 x 2 5/16
Material: plastic
Weight: 0.1
$12.93
119.16312800 Regulators and Hoses
LP regulator with
QCC-1 connection and two 23 hoses for some side burner applications.
- For use on new style QCC-1 tanks.
- Total length is 47
- Both hose ends are SAE 3/8 female flare fittings.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80034
Dimensions: 48 1/2 x 0 1/2
Weight: 1.2
$43.13
119.16312800 Heat indicators and Meat Thermometers
Round 2 3/8 diameter heat indicator, includes one wing nut and one locking nut.
- Requires minimum 3/8 mounting hole
- Single 1 3/8 probe
- Threaded portion of probe stops at 1/2 from base
- See photo for details
Replaces Kenmore factory part# SE0076
Part Number: 00012
Dimensions: 2 3/8 x 2 3/8
Weight: 0.1
$15.16
119.16312800 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4 x 8 3/8
Material: cast iron
Weight: 3.90
$25.40
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4 x 12 3/4
Material: stainless steel
Weight: 1.6
$22.70
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73