Model: 153371

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Kenmore Grill Models > Kenmore 153371



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.

Replacement grill parts to fit Kenmore model: 153371


 

153371 Burners

Cast iron burner for Kenmore model 153371.

Part Number: 29351
Material: cast iron
Weight: 2.2
Dimensions: 12 7/8” x 2 1/8”

$33.06








 

153371 Cooking Grids

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids. Fits ProChef grills, may fit others.

  • Made in USA
  • Commercial grade 304 stainless steel
  • .225” solid stainless rods
  • Sold as a set of two (2).

Each panel measures:
  • Front-to-Back: 16 1/2”
  • Side-to-Side: 11 1.4”
Total Side-to-Side: 22 1/2”

NOTE: Some ProChef grills this part replaces used a wider single-piece grid.

Part Number: 53502-SS-X2
Material: stainless steel
Weight: 7.0
Dimensions:

  • Front-To-Back: 16 1/2″
  • Side-To_Side: 22 1/2″

$96.90






Premium stainless steel cooking grid. Far superior to porcelain coated steel grids. Fits ProChef grills, may fit others.

  • Made in USA
  • Commercial grade 304 stainless steel
  • .225” solid stainless rods
  • Sold individually, 2 required.



Part Number: 53502-SS
Material: stainless steel
Weight: 3.50
Dimensions:
  • Front-To-Back: 16 1/2″
  • Side-To_Side: 11 1/4″

$54.85






Cast iron cooking grids (set of 2). Porcelain enameled, glossy finish.

Part Number: 68252
Material: gloss cast iron
Weight: 13.11
Dimensions:
  • Front-To-Back: 16 1/2″
  • Side-To_Side: 22 3/4″

$105.82






Premium quality stainless steel cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
  • Made in USA
  • 304 commercial grade stainless steel
  • .225 diameter solid stainless rods
  • Each panel measures 16 1/2” x 11 1/4”
  • Overall dimensions: 16 1/2” x 22 1/2”
.

Part Number: CG-51SS-X2
Material: stainless steel
Weight: 7.0
Dimensions:
  • Front-To-Back: 16 1/2″
  • Side-To_Side: 22 1/2″

$96.90








 

153371 Heat Plates

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0154-X3
Material: stainless steel
Weight: 5.76
Dimensions:
  • Front-To-Back: 13 3/16″
  • Side-To_Side: 10 5/8″

$123.21






Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0154
Material: stainless steel
Weight: 1.92
Dimensions:
  • Front-To-Back: 13 3/16″
  • Side-To_Side: 10 5/8″

$48.48






Stainless steel heat plate/ Flame Tamer.
Made in USA

Part Number: KENHP1
Material: stainless steel
Weight: 1.0
Dimensions:
  • Front-To-Back: 13 1/8″
  • Side-To_Side: 10 9/16″

$51.08








 

153371 Valves, Orifices, and Manifolds

Neoprene valve gasket for clamp-on gas control valves. 19mm.

Part Number: 00019
Material: neoprene
Weight: 0.01
Dimensions: 0 1/2” x 0 1/4”

$5.24






Brass orifice. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31400
Material: brass
Weight: 0.01
Dimensions: 0 3/4” x 0 5/16”

$8.04






Clamp-on brass gas valve with straight outlet. Includes orifice.
  • D-Value: 12 o'clock
  • Stem diameter: 6mm
  • Stem length: 1 3/4”
Includes orifice with #72 starter hole. Must be drilled to proper drill size.

Part Number: 3700C
Material: brass
Weight: 0.5
Dimensions: 4 15/16” x 2 1/8”

$38.84








 

153371 Accessories

Apple wood chips.
  • All natural wood smoke flavor
  • Great for use in BBQ's or smokers.
  • 170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00230
Weight: 2.0

$8.47






4 Piece Stainless Steel Tool Set With Accents Turner, tong, and fork constructed of high gade, polished stainless steel, with soft grip accents. Silicone tip tongs heat resistant to 500 degrees farenheit. High quality grill brush.

Part Number: 40070
Material: stainless steel
Weight: 2.12

$39.08






Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.



Part Number: 42055
Weight: 0.2
Dimensions: 13

$8.76






Stainless steel chicken roaster. Commonly called Beer Can roasters.
  • The best way to roast poultry on the grill
  • For use in barbecues and ovens
  • Dishwasher safe
  • Includes rack, rack support, and basting brush


Part Number: 41333
Material: stainless steel
Weight: 0.10

$19.84






Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2

$5.23







Kenmore 153371 - 02-Nov-26



We ship Kenmore BBQ parts worldwide

Back to Kenmore grill parts


GRILLING  ACCESSORIES

Free USA shipping for orders of gas grill parts of $79 or more for Kenmore gas BBQ grills (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy