Home > Kenmore Grill Models > Kenmore 153372
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement grill parts for Kenmore model: 153372
153372 Burners
Cast iron burner for Kenmore model 153372.
Part Number: 29351
Material: cast iron
Weight: 2.2
Dimensions: 12 7/8” x 2 1/8”
153372 Cooking Grids
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids. Fits ProChef grills, may fit others.
- Made in USA

- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2).
Each panel measures:- Front-to-Back: 16 1/2”
- Side-to-Side: 11 1.4”
Total Side-to-Side: 22 1/2”NOTE: Some ProChef grills this part replaces used a wider single-piece grid.
Part Number: 53502-SS-X2
Material: stainless steel
Weight: 7.0
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 22 1/2″
Premium stainless steel cooking grid. Far superior to porcelain coated steel grids. Fits ProChef grills, may fit others.
- Made in USA

- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold individually, 2 required.
Part Number: 53502-SS
Material: stainless steel
Weight: 3.50
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 11 1/4″
Cast iron
cooking grids (set of 2).
Porcelain enameled, glossy finish.
Part Number: 68252
Material: gloss cast iron
Weight: 13.11
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 22 3/4″
Premium quality stainless steel
cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- .225 diameter solid stainless rods
- Each panel measures 16 1/2” x 11 1/4”
- Overall dimensions: 16 1/2” x 22 1/2”
.
Part Number: CG-51SS-X2
Material: stainless steel
Weight: 7.0
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 22 1/2″
153372 Heat Plates
SET OF THREE/3 PACK Stainless steel
heat plate/Flame Tamer. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0154-X3
Material: stainless steel
Weight: 5.76
Dimensions:
- Front-To-Back: 13 3/16″
- Side-To_Side: 10 5/8″
Stainless steel
heat plate/Flame Tamer. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0154
Material: stainless steel
Weight: 1.92
Dimensions:
- Front-To-Back: 13 3/16″
- Side-To_Side: 10 5/8″
Stainless steel
heat plate/ Flame Tamer.
Made in USA
Part Number: KENHP1
Material: stainless steel
Weight: 1.0
Dimensions:
- Front-To-Back: 13 1/8″
- Side-To_Side: 10 9/16″
153372 Valves, Orifices, and Manifolds
Neoprene valve gasket for clamp-on gas control valves. 19mm.
Part Number: 00019
Material: neoprene
Weight: 0.01
Dimensions: 0 1/2” x 0 1/4”
Brass orifice. 6mm x 3/4” cone shaped orifice with #64
drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31400
Material: brass
Weight: 0.01
Dimensions: 0 3/4” x 0 5/16”
Clamp-on brass gas valve with straight outlet. Includes orifice.
- D-Value: 12 o'clock
- Stem diameter: 6mm
- Stem length: 1 3/4”
Includes orifice with #72
starter hole. Must be drilled to proper
drill size.
Part Number: 3700C
Material: brass
Weight: 0.5
Dimensions: 4 15/16” x 2 1/8”
153372 Accessories
Cherry wood chips.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with portk, lamb, poultry, and fish.
Part Number: 00240
Weight: 1.14
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
Dimensions: 16” x 4”
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Non-Stick Wing Rack. A convenient non-stick coated wire wing rack with folding legs, the best way to roast chicken legs and wings on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.
Part Number: 41551
Weight: 0.5
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Kenmore 153372 - 02-Nov-26
|
We ship Kenmore BBQ parts worldwide
Back to Kenmore grill parts