Home > Kenmore Grill Models > Kenmore 15401
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement grill parts for the Kenmore 15401
15401 Burners
Cast iron burner for Kenmore model 15401.
Part Number: 29351
Material: cast iron
Weight: 2.2
Dimensions: 12 7/8” x 2 1/8”
15401 Cooking Grids
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids. Fits ProChef grills, may fit others.
- Made in USA

- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2).
Each panel measures:- Front-to-Back: 16 1/2”
- Side-to-Side: 11 1.4”
Total Side-to-Side: 22 1/2”NOTE: Some ProChef grills this part replaces used a wider single-piece grid.
Part Number: 53502-SS-X2
Material: stainless steel
Weight: 7.0
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 22 1/2″
Premium stainless steel cooking grid. Far superior to porcelain coated steel grids. Fits ProChef grills, may fit others.
- Made in USA

- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold individually, 2 required.
Part Number: 53502-SS
Material: stainless steel
Weight: 3.50
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 11 1/4″
Cast iron
cooking grids (set of 2).
Porcelain enameled, glossy finish.
Part Number: 68252
Material: gloss cast iron
Weight: 13.11
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 22 3/4″
Premium quality stainless steel
cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- .225 diameter solid stainless rods
- Each panel measures 16 1/2” x 11 1/4”
- Overall dimensions: 16 1/2” x 22 1/2”
.
Part Number: CG-51SS-X2
Material: stainless steel
Weight: 7.0
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 22 1/2″
15401 Heat Plates
SET OF THREE/3 PACK Stainless steel
heat plate/Flame Tamer. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0154-X3
Material: stainless steel
Weight: 5.76
Dimensions:
- Front-To-Back: 13 3/16″
- Side-To_Side: 10 5/8″
Stainless steel
heat plate/Flame Tamer. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0154
Material: stainless steel
Weight: 1.92
Dimensions:
- Front-To-Back: 13 3/16″
- Side-To_Side: 10 5/8″
Stainless steel
heat plate/ Flame Tamer.
Made in USA
Part Number: KENHP1
Material: stainless steel
Weight: 1.0
Dimensions:
- Front-To-Back: 13 1/8″
- Side-To_Side: 10 9/16″
15401 Valves, Orifices, and Manifolds
Neoprene valve gasket for clamp-on gas control valves. 19mm.
Part Number: 00019
Material: neoprene
Weight: 0.01
Dimensions: 0 1/2” x 0 1/4”
Brass orifice. 6mm x 3/4” cone shaped orifice with #64
drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31400
Material: brass
Weight: 0.01
Dimensions: 0 3/4” x 0 5/16”
Clamp-on brass gas valve with straight outlet. Includes orifice.
- D-Value: 12 o'clock
- Stem diameter: 6mm
- Stem length: 1 3/4”
Includes orifice with #72
starter hole. Must be drilled to proper
drill size.
Part Number: 3700C
Material: brass
Weight: 0.5
Dimensions: 4 15/16” x 2 1/8”
15401 Accessories
Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.
Part Number: 00281
Weight: .45
Dimensions: 11 7/8
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Weight: 0.4
Dimensions: 9” x 13”
Stuffed Burger Press
The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.
Part Number: 24795
Weight: .3
|
Kenmore grill model 15401. Some parts not specific to a grill brand or model like regulators, posts, and heat indicators, which are listed in our repair parts section. 02-Nov-26
|
We ship Kenmore BBQ parts worldwide
Back to Kenmore grill parts