Home > Kenmore Grill Models > Kenmore 16505
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement grill parts for Kenmore model: 16505
16505 Venturis
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
16505 Cooking Grids
Porcelain steel heavy
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
NOTE: This grid has been designated as a replacement for part # 51051 that weighed 3.5 pounds, measured 13 3/4” x 25 1/4” and it had rounded corners. Due to the rounded corners, using # 53101as a replacement is about 1 3/4” shy on the side-to-side dimension.
Part Number: 53101
Material: porcelain steel wire
Weight: 11.0
Dimensions:
- Front-To-Back: 13 3/4″
- Side-To_Side: 23 1/2″
16505 Igniter Components
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
Genuine OEM 21” wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB2-B
Weight: 0.3
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:
- Gas collector box
- Ceramic electrode and connecting wire with male round connector
- Mounting nuts and bolts
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04400R
Weight: 0.3
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04420
Material: ceramic
Weight: 0.1
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-11B
Weight: 0.3
16505 Knobs and Handles
Universal black control knob. Counter-clockwise bezel.
- Off position D-Value: Selectable
- Knob diameter: 2 1/16”
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01800
Material: plastic
Weight: 0.05
Dimensions: 2 1/16” x 2 1/16”
Black control knob for Fire Magic Custom, Regal, and Gourmet grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 2”
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01700
Material: plastic
Weight: 0.1
Dimensions: 2” x 2”
16505 Accessories
Cherry wood chips.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with portk, lamb, poultry, and fish.
Part Number: 00240
Weight: 1.14
4 Piece Stainless Steel Tool Set With Accents Turner, tong, and fork constructed of high gade, polished stainless steel, with soft grip accents. Silicone tip tongs heat resistant to 500 degrees farenheit. High quality grill brush.
Part Number: 40070
Material: stainless steel
Weight: 2.12
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Non-Stick Wing Rack. A convenient non-stick coated wire wing rack with folding legs, the best way to roast chicken legs and wings on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.
Part Number: 41551
Weight: 0.5
Stuffed Burger Press
The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.
Part Number: 24795
Weight: .3
|
Kenmore 16505 - 02-Nov-26
|
We ship Kenmore BBQ parts worldwide
Back to Kenmore grill parts