Home > Kenmore Grill Models > Kenmore 258.2347970
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Kenmore grill. This is best done with the old parts out of the grill. Verify your Kenmore grill model number.
Replacement grill parts for Kenmore model: 258.2347970
258.2347970 Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 10502-70301
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 3.0
$73.33
Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
Part Number: 10502
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 2.5
$55.61
Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 20502-70301
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 8.0
$77.30
cast iron burner head for Kenmore model 258.2347970.
Part Number: 20502
Dimensions: 15 7/8” x 8”
Material: cast iron
Weight: 7.7
$64.56
258.2347970 Venturis
straight adjustable single venturi. Includes all necessary gaskets and screws/nuts.
Part Number: 70301
Dimensions: 7
Material: zinc plated steel
Weight: 0.5
$15.59
Single Gasket Kit Economy Burners for Kenmore model 258.2347970.
Part Number: SHK4
Weight: 0.01
$4.02
258.2347970 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 50301
Dimension Front-to-Back: 13 1/16”
Dimension Side-to-Side: 19 5/8”
Material: porcelain steel wire
Weight: 4.4
$49.81
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 54501
Dimension Front-to-Back: 13”
Dimension Side-to-Side: 19”
Material: porcelain steel wire
Weight: 4.6
$49.81
Chrome/nickel plated
cooking grid. Sold individually, two (2) required. Made in USA
.
Part Number: CG-13
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 11 7/8”
Material: Chrome steel
Weight: 2.4
$28.06
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- 304 commercial grade stainless steel
- .225 diameter stainless rods
- Made in USA
- Sold individually
Part Number: CG-9SS
Dimension Front-to-Back: 14 3/8”
Dimension Side-to-Side: 11 3/4”
Material: Stainless steel
Weight: 3.7
$53.89
258.2347970 Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Kenmore model 258.2347970.
Part Number: BG-4
Dimensions: 11 5/8” x 19”
Material: Carbon steel
Weight: 2.7
$27.40
258.2347970 Igniter Components
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
$10.81
258.2347970 Warming Racks
Universal warming rack. For use on grills with at least 22” inside dimension.
Part Number: AP-6A
Dimensions: 6” x 21 1/2”
Material: Chrome steel
Weight: 1.3
$17.36
258.2347970 Valves, Orifices, and Manifolds
In post control valve without manifold or orifice, accepts accepts common 5/16” x 32
spud orifice. Fits Arkla and most twin in post control grills with
spud orifice. Orifice not included.
Part Number: 38700
Dimensions: 3 1/8” x 1 3/8”
Material: brass
Weight: 0.3
$28.50
258.2347970 Accessories
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Ceramic briquettes 48 pieces. Fits briquette trays
94751,
92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".
Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5
$69.08
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31