Home > Kenmore Grill Models > Kenmore 415.15661
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement grill parts for Kenmore model: 415.15661
415.15661 Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
two venturi gaskets with screws for Kenmore model 415.15661.
Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05
$4.65
415.15661 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 55801
Dimension Front-to-Back: 14 23/32”
Dimension Side-to-Side: 26 5/8”
Material: porcelain steel wire
Weight: 6.2
$74.44
415.15661 Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Kenmore model 415.15661.
Part Number: BG-39
Dimensions: 11” x 25”
Material: carbon steel
Weight: 4.0
$28.14
415.15661 Vaporiser Bar
Stainless steel Vaporiser Bar (
heat plate). Fits Charbroil MasterFlame series 8000 grills, others.
Part Number: 94181
Dimension Front-to-Back: 26 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.3
$27.70
415.15661 Igniter Components
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
$5.35
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04420
Material: ceramic
Weight: 0.1
$9.89
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:
- Gas collector box
- Ceramic electrode and connecting wire with male round connector
- Mounting nuts and bolts
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# 4153746
Part Number: 04400R
Weight: 0.3
$9.34
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# 5156105
Part Number: IG-11B
Weight: 0.3
$9.34
Push-Button self-grounding
piezo spark generator. Has round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. For more information, see our help center article
Ignition 101.
Replaces Kenmore factory part# 4153713
Part Number: 03100
Weight: 0.1
$9.25
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
415.15661 Knobs and Handles
Black control knob.
- Off position D-Value: 9 o'clock
- Knob diameter: 1 3/4”
- Socket diameter: 8mm
- Knob shaft: None
Replaces Kenmore factory part# 4154203
Part Number: 04470
Dimensions: 1 7/8” x 1 7/8”
Material: plastic
Weight: 0.1
$5.77
415.15661 Warming Racks
Chrome steel bottom warming rack for Charbroil 8000 series U-burner grills. Was used with top rack 06449 that is no longer available.
Warning:No longer made to work with upper warming rack. Does not have eyelet holes on right and left sides of warming rack to support the upper warming rack.
Replaces Kenmore factory part# 4152125
Part Number: 02125
Dimensions: 26 1/4” x 10 1/2”
Material: chrome steel wire
Weight: 1.14
$32.04
415.15661 Accessories
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA .
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
$42.81
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$22.17
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
High quality, long lasting ceramic briquettes. 90 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 90 briquettes will cover about 562 square inches. This is an area roughly 17” x 33”. For larger grills.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA Part Number: CLA-AC0405
Dimensions: 2” x 2”
Material: ceramic
Weight: 11.7
$80.96 $72.18
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60