Home > Kenmore Grill Models > Kenmore 415.156851
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement gas grill parts for Kenmore model: 415.156851
415.156851 Burners
Stainless steel U burner. Includes burner, mounting bracket, drip bar, and hardware. The overall burner dimensions are 29” x 4 1/4”. The 3 9/16” measurement is center-to-center of the tubing. The drip bar is 23” x 4 3/4”.
Replaces Kenmore factory part# 4068207
Part Number: 13802
Dimensions: 29” x 3 9/16”
Material: stainless steel
Weight: 2.8
$59.32
415.156851 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Replaces Kenmore factory part# 4152741
Part Number: 55801
Dimension Front-to-Back: 14 23/32”
Dimension Side-to-Side: 26 5/8”
Material: porcelain steel wire
Weight: 6.2
$74.44
415.156851 Igniter Components
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
$5.35
Ceramic electrode with male
spade connector and mounting bracket for Kenmore models with U-shaped burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04410
Material: ceramic
Weight: .05
$8.58
415.156851 Knobs and Handles
Black control knob.
- Off position D-Value: 9 o'clock
- Knob diameter: 1 3/4”
- Socket diameter: 8mm
- Knob shaft: None
Replaces Kenmore factory part# 4154203
Part Number: 04470
Dimensions: 1 7/8” x 1 7/8”
Material: plastic
Weight: 0.1
$5.77
415.156851 Warming Racks
Chrome steel bottom warming rack for Charbroil 8000 series U-burner grills. Was used with top rack 06449 that is no longer available.
Warning:No longer made to work with upper warming rack. Does not have eyelet holes on right and left sides of warming rack to support the upper warming rack.
Replaces Kenmore factory part# 4152125
Part Number: 02125
Dimensions: 26 1/4” x 10 1/2”
Material: chrome steel wire
Weight: 1.14
$32.04
415.156851 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59