Home > Kenmore Grill Models > Kenmore 415.16505900Kenmore Dual-burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Part diagrams and owners manuals for Kenmore model: 415.16505900
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Kenmore model: 415.16505900
415.16505900 Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Replaces Kenmore factory part# 80017864
Part Number: 11612-76712
Dimensions: 16 7/8” x 2 1/4”
Material: stainless steel
Weight: 1.4
$42.24
Stainless steel burner for Kenmore model 415.16505900.
Part Number: 11612
Dimensions: 16 7/8” x 2 1/4”
Material: stainless steel
Weight: 1.4
$32.51
415.16505900 Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
L-shaped venturi pair. Includes all necessary gaskets and screws/nuts.
Part Number: 76712
Dimensions: 7 5/8” x 2 1/2”
Material: zinc plated steel
Weight: 0.7
$15.59
415.16505900 Cooking Grates
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Replaces Kenmore factory part# 80009841
Part Number: 51051
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 25 1/4”
Material: porcelain steel wire
Weight: 3.4
$61.45
415.16505900 Igniter Components
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:
- Gas collector box
- Ceramic electrode and connecting wire with male round connector
- Mounting nuts and bolts
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04400R
Weight: 0.3
$9.34
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-11B
Weight: 0.3
$9.34
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# 80012227
Part Number: 04420
Material: ceramic
Weight: 0.1
$9.89
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# 80014484
Part Number: IGEIB2-B
Weight: 0.3
$31.52
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# 80014484
Part Number: 03320
Weight: 0.3
$27.78
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
$16.46
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
415.16505900 Knobs and Handles
Black control knob for Fire Magic Custom, Regal, and Gourmet grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 2”
- Socket diameter: 8mm
- Knob shaft: None
Replaces Kenmore factory part# 80000035
Part Number: 01700
Dimensions: 2” x 2”
Material: plastic
Weight: 0.1
$10.87
Universal black control knob. Counter-clockwise bezel.
- Off position D-Value: Selectable
- Knob diameter: 2 1/16”
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01800
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.05
$6.26
415.16505900 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31