Home > MHP Grill Models > MHP JNR4-PS
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your MHP grill.
Replacement grill parts for the MHP JNR4-PS
JNR4-PS Burners
Exclusive patented H type stainless steel dual burner and venturi assembly. Burner gas ports are uniform in size and shape, providing uniform flame on each port. Entire venturi is made of stainless steel, has a built-in Spider Guard, and are bolt-on. Fits JNR and GJK
Part Number: HH-DSB13AM
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0
$62.06
Genuine OEM MHP stainless steel H Burner for JNR and GJK Burner only for MHP model JNR4-PS.
Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0
$52.30
JNR4-PS Cooking Grids
SearMagic
Cooking Grids for JNR - SOLD INDIVIDUALLY, two (2) required. High Performance, Rust-Free Anodized Aluminum
Cooking Grids. This unique
cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
See part HH-GRIDS-SET for a set of two (2).
Part Number: HH-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 10”
Weight: 4.0
$72.20
Stainless steel
cooking grid for JNR. JNR4 Series standard
cooking grid is made of 1/4” stainless steel rods which are extremely durable and easy to clean. Each panel measures 15 1/2” x 9 15/16”.
Sold individually.
Part Number: HH-SSGRID2
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 3.2
$68.90
JNR4-PS Rock Grates
Premium grade stainless steel
rock grate with 1/4” rods for WNK & TJK model grills for MHP model JNR4-PS.
Part Number: HH-GRATE-SS
Dimensions: 13 5/8” x 18”
Weight: 5.5
$73.70
JNR4-PS Heat Plates
JNR Deflector Shield For Control Panel for MHP model JNR4-PS.
Part Number: HH-DEF
Weight: 1.0
$12.12
JNR4-PS Igniter Components
Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IB
Weight: 0.2
$13.11
Flat washer for igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-M17
Weight: 0.1
$0.83
12” igniter connecting wire for battery-operated electronic igniters. Female
spade connector on one end connects to igniter, female
spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-ERIW
Weight: 0.3
$7.06
Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-EIB
Weight: 0.2
$31.52
JNR4-PS Grease Trays
Stainless steel grease cup for JNR, WNK, and TJK for MHP model JNR4-PS.
Part Number: GG-GC
Weight: 0.3
$11.37
JNR4-PS Knobs and Handles
Main control knob for JNR, WNK, TJK.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/4”
Part Number: GG-K10
Weight: 0.2
$4.37
JNR4-PS Valves, Orifices, and Manifolds
Propane Valve for JNR for MHP model JNR4-PS.
Part Number: HH-VLV28
Weight: 0.4
$50.25
JNR4-PS Heat indicators and Meat Thermometers
Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.
- 2 1/2” diameter.
- Single prob
- Requires 3/8” mounting hole
Part Number: GG-TG4
Weight: 0.15
$21.23
Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.
Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15
$11.37
JNR4-PS Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31