Home > MHP Grill Models > MHP JNR4
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your MHP grill.
Replacement BBQ grill parts for MHP model: JNR4
JNR4 Burners
Exclusive patented H type stainless steel dual burner and venturi assembly. Burner gas ports are uniform in size and shape, providing uniform flame on each port. Entire venturi is made of stainless steel, has a built-in Spider Guard, and are bolt-on. Fits JNR and GJK
Part Number: HH-DSB13AM
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0
$62.06
Genuine OEM MHP stainless steel H Burner for JNR and GJK Burner only for MHP model JNR4.
Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0
$52.30
JNR4 Venturis
SS twin venturi. For use with GG-DLB and HH-DSB H burners. Includes gaskets and hardware, and spider guards. Fits JNR, WNK, and TJK grills.
Part Number: GG-DV13
Material: stainless steel
Weight: 1.0
$19.80
JNR4 Cooking Grids
SearMagic
Cooking Grids for JNR - SOLD INDIVIDUALLY, two (2) required. High Performance, Rust-Free Anodized Aluminum
Cooking Grids. This unique
cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
See part HH-GRIDS-SET for a set of two (2).
Part Number: HH-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 10”
Weight: 4.0
$72.20
Stainless steel
cooking grid for JNR. JNR4 Series standard
cooking grid is made of 1/4” stainless steel rods which are extremely durable and easy to clean. Each panel measures 15 1/2” x 9 15/16”.
Sold individually.
Part Number: HH-SSGRID2
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 3.2
$68.90
JNR4 Rock Grates
Premium grade stainless steel
rock grate with 1/4” rods for WNK & TJK model grills for MHP model JNR4.
Part Number: HH-GRATE-SS
Dimensions: 13 5/8” x 18”
Weight: 5.5
$73.70
JNR4 Heat Plates
JNR Deflector Shield For Control Panel for MHP model JNR4.
Part Number: HH-DEF
Weight: 1.0
$12.12
JNR4 Igniter Components
Rotary Ignitor Knob (Sometimes manufacturer supplies with white arrows or black imprinted arrows.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-K9
Weight: 0.1
$5.45
Rotary Ignitor kit for JNR, WNK, TJK.
Includes:- GG-RI Rotary spark generator
- GG-K9 Knob
- GG-IB Electrode & Collector box
- GG-RIW Connecting wire
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RIC
Weight: 0.3
$34.60
12” connecting wire for use with rotary igniters. Does not fit battery-operated electronic igniters. Female
spade connector on one end connects to electrode, female
round connector on the other end connects to rotary igniter. FIts older JNR, WNK, and Patriot grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RIW
Weight: 0.3
$6.44
Single outlet rotary ignitor. Fits JNR, WNK, TJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RI
Weight: 0.1
$11.83
Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IB
Weight: 0.2
$13.11
Flat washer for igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-M17
Weight: 0.1
$0.83
12” igniter connecting wire for battery-operated electronic igniters. Female
spade connector on one end connects to igniter, female
spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-ERIW
Weight: 0.3
$7.06
Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-EIB
Weight: 0.2
$31.52
JNR4 Grease Trays
Stainless steel grease cup for JNR, WNK, and TJK for MHP model JNR4.
Part Number: GG-GC
Weight: 0.3
$11.37
JNR4 Grill Covers
Premium quality full-length vinyl fabric cover with E-Z on velcro tabs. Fits JNR and AMCJ model grills without a side burner.
- 48” left to right
- 20” front to back
- 35” top to bottom
Part Number: CV2PREM
Material: Vinyl
Weight: 3.5
$59.11
JNR4 Knobs and Handles
Main control knob for JNR, WNK, TJK.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/4”
Part Number: GG-K10
Weight: 0.2
$4.37
JNR4 Valves, Orifices, and Manifolds
Propane Valve for JNR for MHP model JNR4.
Part Number: HH-VLV28
Weight: 0.4
$50.25
JNR4 Heat indicators and Meat Thermometers
Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.
- 2 1/2” diameter.
- Single prob
- Requires 3/8” mounting hole
Part Number: GG-TG4
Weight: 0.15
$21.23
Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.
Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15
$11.37
JNR4 Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
High quality, long lasting ceramic briquettes. 70 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 70 briquetes will cover about 437 square inches. This is an area roughly 17” x 26”.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA Part Number: CLA-AC0399
Dimensions: 2” x 2”
Material: ceramic
Weight: 9.75
$63.34 $56.40
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59